Lindy 32364 - Manual (Page 42)

LINDY Dual/Quad PRO Installation and Use Page 41
4.5 Activity indicators
The LINDY Dual/Quad PRO has a front panel activity indicator for each user port
(see figure 1). The indicator will flash when keyboard or mouse data is received by
the LINDY Dual/Quad PRO. These indicators provide a useful confirmation that the
keyboards and mice connected to the LINDY Dual/Quad PRO are functioning
normally.
4.6 Selecting a computer using the front panel controls
To select a computer using the front panel controls, press the USER key until the
green USER display shows the user port number that your keyboard and mouse are
connected to. Then press the COMPUTER key until the red COMPUTER display
shows the computer that you wish to connect to. Pressing the computer key will
cause the computer channel to change to the next available port. If the password
security system has not been enabled then this will be the next highest channel
number in the sequence shown below. If password security has been enabled then
you will only be able to select the computer ports that you have access to. If the
front panel controls have been disabled by the administrator then you will only be
able to select the special channels 'o' and '0' (the on-screen menu / login screen or
non-existent channel zero).