Lindy 32364 - Manual (Page 63)

LINDY Dual/Quad PRO Installation and Use Page 62
Step 4 - Power off the LINDY Dual/Quad PRO
Remove both power supplies from the Dual / Quad PRO.
Step 5 - Power on the LINDY Dual/Quad PRO with the UPGRADE switch ON
Attach the power adapter to the LINDY Dual/Quad PRO whilst the UPGRADE switch
is ON. The green USER display should now show a lower case 'u'. This indicates
that the LINDY Dual/Quad PRO is ready to be upgraded.
The display should now show:
Step 6 - Run the upgrade program
The latest version of the LINDY Dual/Quad PRO firmware is available from the
LINDY Electronics Ltd website at www.lindy.co.uk. The upgrade files will be
supplied to you as a group and consist of several files as explained below. These
files should be downloaded to the same directory on your computer.
1) A universal upgrade program
LDQP.EXE
2) Binary code files for each of the processors within the LINDY Dual/Quad PRO
(up to 3)
e.g. 4X16A129.HEX
4X16B129.HEX
4X16C129.HEX
These files use the following naming scheme. The first four characters are the
model type (e.g. 4X16 is a LINDY Dual/Quad PRO 4 with 16 computer ports). The
fifth character is the processor designation. The last three characters represent the
firmware release version (e.g. 129 equals version 1.29).