Linksys PC22604 - Manual (Page 12)

Changing the Administration Password
1. Use the Down Arrow key to highlight admin Password and press the
Enter key. The Enter Old Password screen will appear.
2. Enter the current password. Each character you type appears as an aster-
isk (*). If you make a mistake, use the Backspace key to delete the error.
3. Press Enter. The Enter New Password screen will appear.
4. Enter the new password. For security, each password character you type
appears as an asterisk (*). The password is case-sensitive, can be no more
than 16 characters (only alphanumeric characters and the underscore “_”
character can be used).
15
ProConnect II ® Series
14
Layer 2 Management 4-Port Gigabit Ethernet Switch
2. Enter a system name (16 characters max.). If you make a mistake, use the
Backspace key to delete the error.
3. Press Enter to return to the General screen.
Changing the Contact
To change the contact:
1. From the General screen, highlight Contact and press the Enter key. The
Enter Contact screen appears.
2. Enter a contact name. If you make mistakes, use the Backspace key to
delete the error.
3. Press the Enter key to return to the General screen.
Changing the Location
1. From the General screen, move the cursor to Location and press the
Enter key. The Enter Location screen will appear.
2. Enter a location name. If you make a mistake, use the Backspace key to
delete the error.
3. Press Enter to return to the General screen.