Linksys PC22604 - Manual (Page 43)

77
ProConnect II ® Series
OTHER PROTOCOLS
Highlight Other Protocols from the Advanced Management screen and press
the Enter key. The Other Protocol Settings screen will appear, with the
GVRP value highlighted.
1. To change the GVRP setting, press Enter with GVRP highlighted. When
the following screen appears, highlight the desired setting and press
Enter.
76
Layer 2 Management 4-Port Gigabit Ethernet Switch
2. To change the IGMP setting, highlight IGMP and press Enter. When the
following screen appears, highlight the desired setting and press Enter.
3. When you finish, press the Esc key until you return to the desired screen.
PORT TRUNKING
Using Port Trunking from the Advanced Management screen, you can associ-
ate ports with trunk groups.
1. From the Advanced Management screen, highlight Port Trunking and
press the Enter key. The following screen will appear.
2. Highlight the trunk group to which you want the ports assigned, then
press Enter. A screen similar to the following (see next page) will appear.