Linksys PC22604 - Manual (Page 57)

105
Layer 2 Management 4-Port Gigabit Ethernet Switch ProConnect II ® Series
3. Highlight the file type you want to send and press the Enter key. The file
type you selected appears next to File Name.
4. Use the Down Arrow key to highlight IP Address, then press the Enter
key. When the Enter IP Address screen appears, type the IP address from
where the file will be obtained. The address consists of numbers separated
by periods. For example: 192.168.1.100
5. Press the Enter key. The IP address appears next to IP Address.
6. When you finish, press the Esc key. A prompt asks whether you want to
transfer the file now.
7. Highlight Yes and press the Enter key to transfer the file now, or press the
Esc key or highlight No and press the Enter key to not transfer the file at
this time.
Receiving Files via Kermit
To receive files using the Kermit protocol:
1. From the File Transfer screen, highlight Receive File Via Kermit and
press the Enter key. A prompt asks whether you want to transfer the file
now.
104
2. Highlight Yes and press the Enter key to transfer the file now, or press the
Esc key or highlight No and press the Enter key to not transfer the file at
this time.
Sending Files via Kermit
To send files using the Kermit protocol:
1. From the File Transfer screen, highlight Send File Via Kermit and press
the Enter key. The Select File Type screen appears.
2. Highlight the file type you want to send and press the Enter key. A
prompt asks whether you want to transfer the file now.
3. Highlight Yes and press the Enter key to transfer the file now, or press the
Esc key or highlight No and press the Enter key to not transfer the file at
this time.