Linksys PC22604 - Manual (Page 50)

6. Highlight the desired transmit priority, then press the Enter key. The trans-
mit priority you selected appears next to Transmit Priority.
7. Press the Esc key to return to the VLAN Priority Index screen.
8. To specify other VLAN priority settings, repeat steps 2 through 7.
9. When you finish, press the Esc key until the appropriate screen appears.
Specifying the ToS Priority
To specify ToS priority:
1. From the QoS screen, press the Down Arrow key to highlight ToS, then
press the Enter key. The ToS Priority Index screen appears.
91
Layer 2 Management 4-Port Gigabit Ethernet Switch ProConnect II ® Series
2. Press the Down Arrow key to highlight a VLAN priority number, and
then press the Enter key. The VLAN Priority Setting screen appears.
3. With Drop Priority highlighted, press the Enter key. The Drop Priority
screen appears.
4. Highlight either Low or High, and then press the Enter key. Your selection
appears next to Drop Priority.
5. Press the Down Arrow key to highlight Transmit Priority, and then press
the Enter key. The Transmit Priority screen appears.
90