Life Fitness G3 - Manual (Page 12)

11
S
TEP
1:
• Loosely assemble two BASE PLATES (11) to the FRONT BASE (1) and the BASE CONNECTOR
(3) using four 3/8 x 3-3/4" BOLTS (57) and four 3/8" SILVER LOCK NUTS (63). See Figure 1.
• Loosely assemble the FOOTPLATE (66) to the FRONT BASE (1) using one 3/8 x 3" BLACK
BOLT (77) and one 3/8" BLACK LOCK NUT (78) as shown in Figure 1.
• Loosely assemble the REAR BASE (4) to the BASE CONNECTOR (3) using two 3/8 x 3-3/4"
BOLTS (57), two 3/8" WASHERS (64) and two 3/8" SILVER LOCK NUTS (63).
• Loosely assemble the UPRIGHT (2) to the FRONT BASE (1) using two 3/8 x 2-3/4" BOLTS (60),
two 3/8" WASHERS (64) and two 3/8" SILVER LOCK NUTS (63).
2
63
4
11
57 3/8 X 3-3/4”
3/8 X 3” 3
63
63
77
64
64
1
3
60
3/8 X 2-3/4”
57
78
66
F
IGURE
1