Life Fitness G3 - Manual (Page 19)

18
I
MPORTANT
!
U
NCOIL AND STRAIGHTEN ALL CABLES TO REMOVE ALL TWISTS BEFORE
INSTALLING
.
S
TEP
10:
• Assemble the WEIGHT STACK PIN (27) to
the HEAD PLATE ASSEMBLY (23) as shown
in Figure 10.
• Screw the long threaded end of the WEIGHT
STACK CABLE (29) into the end of the
HEAD PLATE ASSEMBLY (23). See Figure
10.
• Route the WEIGHT STACK CABLE (29)
around the pulleys in the RIGHT and LEFT
BOOM PLATES (14 & 15) as shown in
Figure 10.
NOTE: Make sure the cable runs in the
grooves of the pulleys.
• Tighten the two 3/8 x 3-3/4" Bolts (57) hold-
ing the 3-1/2" CABLE GUARD (34) and the
4-1/2" CABLE GUARD (35).
NOTE: Make sure the guards are oriented
correctly.
• Assemble the two PULLEY PLATES (10)
around one 3-1/2" PULLEY (37), using one
3/8 x 1-3/4" BOLT (53) and one 3/8" SILVER
LOCK NUT (63) as shown in Figure 10.
14
63
29
53
10
23
37
3/8X 1-3/4”
27
15
F
IGURE
10