Life Fitness G3 User Manual
Page 31
Advertising
30
This completes the assembly of the G3 Gym System.
S
TEP
24:
A. SECURELY assemble the LEFT SHROUD (1) and RIGHT SHROUD (2) to the TOP (3) and
BOTTOM (4) SHROUD BRACKETS using eight 3/8 X 1” BUTTON HEAD BOLTS (5) and eight
3/8” BLACK SAE WASHERS (6) as shown in FIGURE 2.
B. One M4 X 20mm SHOULDER BOLT, M4 WASHER, and M4 NUT are pre-assembled to the
shroud. Use use the M4 X 20MM SHOULDER BOLT to hang the G3 Exercise Cards.
FIGURE 24
5 3/8 X 1”
BUTTON
HEAD
2
6
1
Advertising