Life Fitness G3 User Manual
Page 23
22
F
IGURE
14
S
TEP
14:
• Securely assemble one 3-1/2"
PULLEY (37) to the PULLEY
PLATES (10), using one 3/8 x 1-3/4"
BOLT (53) and one 3/8" SILVER
LOCK NUT (63).
NOTE: Loop the LEG CABLE (30)
over the PULLEY (37) before assem-
bling the PULLEY PLATES (10) as
shown in Figure 14.
S
TEP
15:
• Securely assemble one 3-1/2"
PULLEY (37) and both REAR GUIDE
CABLES (74) to the BASE PLATES
(11), using one 3/8 x 4-1/4" SILVER
BOLT (68), two 3/8 x 1" SPACERS
(51) and one SILVER 3/8" LOCK
NUT (63).
NOTE: Loop the LEG CABLE (30)
under the PULLEY (37) before
assembling the BASE PLATES (11),
as shown in Figure 15.
• Adjust the Turnbuckle at the top of
each REAR GUIDE CABLE (74) to
add tension to the REAR GUIDE
CABLES (74) until they are taut.
• Screw the threaded end of the LEG
CABLE (30) into the end of the
PULLEY BRACKET (42).
F
IGURE
15