Paper feed service check, Paper feed service, Paper feed – Lexmark 4076-0XX User Manual

Page 26

Advertising
background image

4076-0XX

14

Paper Feed Service Check

If your machine does not have paper jam problems, go on to the ser-
vice check. If your machine does have a paper jam problem, exam-
ine it for the following before you begin the service check.

•

Check the entire paper path for obstructions.

•

Make sure there is not too much paper in the ASF.

•

Make sure the correct type of paper is in the machine.

•

Check for static in the paper.

•

Make sure the rear of the carrier guide is on top of the paper

guide.

FRU OR PROCEDURE

ACTION

1

System Board

With J5 disconnected and power on,
check for +24 V dc between J5-3 and
ground, and between J5-4 and
ground on the system board. If the
voltage is not present, check for
motor pins shorted to the motor hous-
ing. If you find a shorted pin, replace
the motor. If you still have a failure
after replacing the motor, replace the
system board.

Advertising