Lenovo 3797 - Manual (Page 70)

8. Install the cover (see “Completing the installation” on page 100).
Removing a PCI adapter
To remove an adapter from a PCI riser-card assembly, complete the following steps.
1 Adapter
2 Expansion slot cover
3 PCI riser-card assembly
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 33.
2. Turn off the server and peripheral devices and disconnect all power cords and
external cables (see “Turning off the server” on page 31).
3. Press down on the left and right side rack latches and slide the server out of the
rack enclosure until both slide rails lock; then, remove the cover (see “Removing
the cover” on page 37).
54 ThinkServer RD220 Types 3729, 3779, 3797, and 3798: Installation and User Guide