Lexmark 5025 - Manual (Page 23)

Attaching cables
Connect the printer to the computer using a USB cable or an Ethernet cable. A USB port requires a USB cable. Be sure
to match the USB symbol on the cable with the USB symbol on the printer. Match the appropriate Ethernet cable to
the Ethernet port.
1
2
1 Ethernet port
2 USB port
Verifying printer setup
Printing a menu settings page
Print menu settings pages to review the current menu settings and to verify if the printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings pages list all the factory default
settings. Once you select and save other settings from the menus, they replace the factory default settings as user
default settings. A user default setting remains in effect until you access the menu again, choose another value, and
save it.
1 Make sure that the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Menu Settings Page appears, and then press .
After the menu settings pages print, Ready appears.
Additional printer setup
23