For windows users, For macintosh users – Lexmark 5025 User Manual
Page 31
Before you install the printer on a wired network, make sure that:
•
You have completed the initial setup of the printer.
•
The printer is connected to your network with the appropriate type of cable.
For Windows users
1
Insert the Software and Documentation CD.
Wait for the Welcome screen to appear.
If the CD does not launch after a minute, then do the following:
a
Click
, or click Start and then click Run.
b
In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
2
Click Install Printer and Software.
3
Click Agree to agree to the License Agreement.
4
Select Suggested, and then click Next.
Note: To configure the printer using a static IP address, using IPv6, or to configure printers using scripts, select
Custom and follow the instructions on the computer screen.
5
Select Wired Network Attach, and then click Next.
6
Select the printer manufacturer from the list.
7
Select the printer model from the list, and then click Next.
8
Select the printer from the list of printers discovered on the network, and then click Finish.
Note: If your configured printer does not appear in the list of discovered printers, click Add Port and follow the
instructions on the computer screen.
9
Follow the instructions on the computer screen to complete the installation.
For Macintosh users
1
Allow the network DHCP server to assign an IP address to the printer.
2
Print the network setup page from the printer. For information on printing a network setup page, see “Printing a
network setup page” on page 24.
3
Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you
are configuring access for computers on a different subnet than the printer.
4
Install the drivers and add the printer.
a
Install a PPD file on the computer:
1
Insert the Software and Documentation CD in the CD or DVD drive.
2
Double-click the installer package for the printer.
3
From the Welcome screen, click Continue.
4
Click Continue again after viewing the Readme file.
5
Click Continue after viewing the license agreement, and then click Agree to accept the terms of the
agreement.
6
Select a Destination, and then click Continue.
7
From the Easy Install screen, click Install.
Additional printer setup
31