Lexmark 5025 - Manual (Page 83)

Menu item Description
Print Recovery
Jam Recovery
Auto
On
Off
Specifies whether the printer reprints jammed pages
Notes:
• Auto is the factory default setting. The printer reprints jammed
pages unless the memory required to hold the pages is needed
for other printer tasks.
• On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Print Recovery
Page Protect
Off
On
Lets the printer successfully print a page that may not have printed
otherwise
Notes:
• Off is the factory default setting. Off prints a partial page when
there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the entire
page prints.
Factory Defaults
Do Not Restore
Restore
Returns the printer settings to the factory default settings
Notes:
• Do Not Restore is the factory default setting. Do Not Restore
keeps the user-defined settings.
• Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash memory
or on a printer hard disk are not affected.
Setup menu
Menu item Description
Printer Language
PCL Emulation
PS Emulation
PPDS Emulation
Sets the default printer language
Notes:
• PCL is the factory default printer language.
• PCL emulation uses a PCL interpreter for processing print jobs.
PostScript emulation uses a PS interpreter for processing print
jobs. PPDS emulation uses a PPDS interpreter for processing
print jobs
• Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Print Area
Normal
Fit to Page
Whole Page
Sets the logical and physical printable area
Note: Normal is the factory default setting. When attempting to
print data in the non-printable area defined by the Normal setting,
the printer clips the image at the boundary.
Understanding printer menus
83