Troubleshooting, Setup troubleshooting, Power button is not lit – Lexmark Z2400 Series User Manual
Page 52
Troubleshooting
Using the printer troubleshooting software (Windows
only)
The Lexmark Service Center provides step-by-step troubleshooting help and contains links to printer maintenance
tasks and customer support.
To open the Lexmark Service Center, use one of these methods:
Method 1
Method 2
If it appears on an error message dialog, click the For
additional assistance, use the Lexmark Service
Center link.
1
Do one of the following:
•
In Windows Vista, click
All Programs, and then
select the printer program folder from the list.
•
In Windows XP, click Start Programs or All
Programs, and then select the printer program
folder from the list.
2
Select Lexmark Service Center.
Setup troubleshooting
Power button is not lit
These are possible solutions. Try one or more of the following:
P
RESS
POWER
BUTTON
Make sure the printer is on by pressing
.
D
ISCONNECT
AND
RECONNECT
THE
POWER
CORD
1
Press
to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Remove the power supply from the printer.
4
Plug the power cord all the way into the power supply on the printer.
1
2
5
Plug the power cord into the wall outlet.
52