Lexmark Z2400 Series - Manual (Page 78)

Storage temperature 1–60° C (34–140° F)
ENERGY STAR
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs. 15
Copying The product is generating hard-copy output from hard-copy original
documents. not applicable
Scanning The product is scanning hard-copy documents. not applicable
Ready The product is waiting for a print job. 6.8
Power Saver The product is in energy-saving mode. 5.6
Off The product is plugged into a wall outlet, but the power switch is
turned off. 0.9
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to
the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods
of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of
time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): 30 minutes
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product power
consumption, disconnect the power supply cord from the wall outlet.
78