Land Pride RCR1572 User Manual
Page 14
12
Section 2: Options
RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M
12/28/05
Land Pride
Section 2: Options
Rubber Guards (RCR1548)
Figure 2-1
18333
Front Rubber Guard (RCR1560 & RCR1572)
Install each segment of the front rubber guards (#1) as
shown in Figure 2-2, with 3/8” x 1” long carriage bolts
(#2), and 3/8” flange nuts (#3). Tighten all nuts and bolts
to torque as indicated in the “Torque Values Chart” on
page 24.
Rear Rubber Guard (RCR1560 & RCR1572)
Figure 2-2
Rear Rubber Guard (RCR1560 & RCR1572)
Install rear rubber guard (#1) as shown in Figure 2-3, with
3/8” x 3 1/2” long carriage bolts (#2), 3/8” flange nuts (#3)
and spacers (#4). Tighten all nuts and bolts to torque as
indicated in the “Torque Values Chart” on page 24.
Front Rubber Guard (RCR1560 & RCR1572)
Figure 2-3
18334
Rubber Guards (RCR1542 & RCR1548)
Install front rubber guard (#1), rear rubber guard (#2) and
front and rear straps (#3) and (#4) as shown in
Figure 2-5, with 3/8” x 1” long carriage bolts (#5), and 3/
8” flange nuts (#6). Tighten all nuts and bolts to torque as
indicated in the “Torque Values Chart” on page 24.
Safety Guards
!
DANGER
Rotary cutters have the ability to discharge objects at high
speeds; therefore, the use of front and rear safety shields is
strongly recommended when cutting along highways or in an
area where people may be present.