Safety labels, Table of contents safety labels, 540c – Land Pride RCR1572 User Manual
Page 6
4
Important Safety Information
RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M
12/28/05
Land Pride
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new labels
go to your nearest Land Pride dealer.
3. Some new equipment installed during repair requires safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new components make sure
the correct safety labels are included in the request.
4. Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b.
Spray soapy water on the surface where the label is to
be placed.
c.
Peel backing from label. Press firmly onto the surface.
d.
Squeeze out air bubbles with the edge of a credit card.
818-130C
Caution 540 RPM
818-543C
Danger PTO
818-540C
Danger Guard Missing
16342
16342
16342