Land Pride RCR1572 User Manual
Page 24
22
Section 6: Features and Benefits
RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M
12/28/05
Land Pride
Section 6: Features and Benefits
RCR15 Series Single Deck Rotary Cutters
Features
Benefits
Tractor HP range
15- 50hp
Cutting widths
42” and 48”
Floating top link
Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift
leverage for smaller tractors.
Clevis Hitch
Cat I, 3-point hitch with floating link for easy hook-up.
Fully welded deck
Robotic welded. Adds additional strength.
Round back design
Helps discharge grass better than enclosed or partially enclosed cutters.
High blade tip speed
Ensures clean cut.
42” = 11,459 fpm
48” = 13,090 fpm
Rubber guards (front and rear)
Protect against flying debris.
Full length skid shoes
Provides sidewall reinforcement and full protection to bottom of sidewall.
Cat. 3 driveline with shear- bolt
Shear bolt offers maximum driveline protection.
Cat. 3 driveline with
2-plate slip-clutch
Slip-clutch driveline offers convenience for continual work.
Laminated tailwheel
Laminated material is long lasting in rough conditions.
Solid rubber tailwheel
Can’t go flat.
Heavy-duty spindle on
tailwheel
Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly.
Cutting Height
1” - 9” cutting height for wide range of cutting conditions.
10 Gauge stump jumper
Allows cutter to slide over obstructions protecting the gearbox output shaft.
Splined bladebar hub
Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
Surpassed rugged industry
standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
procedures specified by ANSI.
2 Year gearbox warranty
Shows our confidence in the gearbox integrity.