Land Pride RCR1572 User Manual
Page 21
19
Section 4: Maintenance and Lubrication
12/28/05
RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M
Land Pride
Gauge Wheel Spindle Tube
Type of Lubrication: Grease
Quantity = 6 pumps
16344
Gauge Wheel Hub
The gauge wheel hub is equipped with a relief hole
located directly opposite the grease fitting. The relief
hole releases pressure from inside the hub casting
when it is greased. The hub should be greased until
grease purges from the relief hole.
Type of Lubrication: Multipurpose Grease
Quantity = Until grease purges from the relief hole
16278
Gearbox
Check oil level in the gearbox by removing the side plug in
the gearbox case. If the oil level is low, remove the top plug
in the gearbox case and fill with EP90 oil until oil flows from
the side port of gearbox case. Reinstall plugs and tighten.
ype of Lubrication: EP90 Oil
Quantity = fill until oil flows from the side port of gearbox
case.
NOTE: Do not overfill! Cutter should be level when
checking oil.
16345
Lubrication Points
50
Multi-purpose
spray lube
Multi-purpose
grease lube
Intervals in hours
at which lubrication
is required
Lubrication
Legend
Multi-purpose
oil lube
8
Hours
24
Hours
8
Hours