Problems when using the auto mcacc setup, The input setup menu, 1 switch on the receiver and your tv – Pioneer VSX-919AH-K User Manual
Page 39: 3 select ‘system setup’ from the home menu, 4 select ‘input setup’ from the system setup menu, The input setup menu on, Basic setup 04
Basic Setup
04
39
En
7
The Auto MCACC Setup procedure is
completed and the Home Menu menu
reappears automatically.
1
Be sure to disconnect the microphone from
this receiver upon completion of the Auto
MCACC Setup.
The settings made in the Auto MCACC Setup
should give you excellent surround sound from
your system, but it is also possible to adjust
these settings manually using
MCACC menu on page 77 or The system and
2
Problems when using the Auto
MCACC Setup
If the room environment is not optimal for the
Auto MCACC Setup (too much background
noise, echo off the walls, obstacles blocking
the speakers from the microphone) the final
settings may be incorrect. Check for household
appliances (air conditioner, fridge, fan, etc.),
that may be affecting the environment and
switch them off if necessary. If there are any
instructions showing in the front panel display,
please follow them.
• Some older TVs may interfere with the
operation of the microphone. If this seems
to be happening, switch off the TV when
doing the Auto MCACC Setup.
The Input Setup menu
You only need to make settings in the
Input
Setup menu if you didn’t hook up your digital
equipment according to the default settings
(see
Input function default and possible
settings on page 40). In this case, you need to
tell the receiver what equipment is hooked up
to which terminal so the buttons on the remote
control correspond to the components you’ve
connected.
1
Switch on the receiver and your TV.
Use
RECEIVER to switch on.
2
Press
on the remote control,
then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
/// and
ENTER to navigate through the screens and
select menu items. Press
RETURN to confirm
and exit the current menu.
3
Select ‘System Setup’ from the HOME
MENU.
4
Select ‘Input Setup’ from the System
Setup menu.
5
Select the input function that you want to
set up.
The default names correspond with the names
next to the terminals on the rear panel (such as
DVD or VIDEO) which, in turn, correspond
with the names on the remote control.
Note
1 You can also choose to view the settings from the
MCACC Data Check screen. See Checking MCACC Data on page 89
for more on this.
2 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5
inches) will end up with different size settings. You can correct the setting manually using the
on page 94.
• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting
should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.
• If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing
environment, we recommend adjusting the settings manually.
RECEIVER
A/V RECEIVER
Exit
Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
4.SystemSetup
4b.Input Setup
A/V RECEIVER
Exit
Finish
INPUT :
DVD
Input Name
:
Rename
Digital In
:
COAX-1
HDMI Input
:
- - -
Input Skip
:
OFF
Component In
:
Comp-1
VSX-1019_KU.book Page 39 Thursday, January 8, 2009 12:01 PM