Document Outline

• Contents
  • Flow of settings on the receiver
    • 1 Before you start
  • j
    • 2 Determining the speakers’ application (page 15)
  • j
    • 3 Connecting the speakers
  • j
    • 4 Connecting the components
  • j
    • 5 Switching the speaker impedance (page 36)
  • j
    • 6 Power On
  • j
    • 7 Changing the OSD display language (OSD Language) (page 36)
  • j
    • 8 Surround back speaker setting (page 94)
  • j
    • 9 MCACC speaker settings
  • j
    • 10 The Input Setup menu (page 39)
  • j
    • 11 Basic playback (page 41)
  • j
    • 12 Adjusting the sound and picture quality as desired
  • j
    • 13 Other optional adjustments and settings
  • j
    • 14 Making maximum use of the remote control
• Before you start
  • Checking what’s in the box
  • Installing the receiver
  • Loading the batteries
    • CAUTION
• Controls and displays
  • Front panel
    • 1 INPUT SELECTOR dial
    • 2 u STANDBY/ON
    • 3 Tuner controls
    • 4 PHASE CONTROL indicator - Lights to indicate Phase Control is selected (page 59).
    • 5 Character display
    • 6 ENTER
    • 7 Remote sensor
    • 8 MASTER VOLUME dial
    • 9 PHONES jack
    • 10 Listening mode buttons
    • 11 SPEAKERS
    • 12 MULTI-ZONE controls
    • 13 iPod/iPhone/USB, VIDEO INPUT terminals
    • 14 MCACC SETUP MIC jack
  • Display
    • 1 SIGNAL indicators
    • 2 Program format indicators
    • 3 Digital format indicators
    • 4 S.RTRV
    • 5 MULTI-ZONE
    • 6 DSD PCM - Light during DSD (Direct Stream Digital) to PCM conversion with SACDs.
    • 7 SOUND
    • 8 PQLS
    • 9 UP MIX
    • 10 Listening mode indicators
    • 11 (PHASE CONTROL)
    • 12 Analog signal indicators
    • 13 Tuner indicators
    • 14
    • 15 Master volume level
    • 16 Input function indicators
    • 17 Scroll indicators
    • 18 Matrix decoding format indicators
    • 19 Speaker indicators
    • 20 SLEEP
    • 21 MSTR
    • 22 Character display
    • 23 Remote control mode indicator
  • Remote control
    • 1 u RECEIVER
    • 2 Input function buttons
    • 3 Number buttons and other receiver/ component controls
    • 4 TV CONTROL buttons
    • 5 Tuner/component control buttons/HOME MENU
    • 6 i/j/k/l (TUNE/PRESET) /ENTER
    • 7 Receiver controls
    • 8 Component control buttons
    • 9 AUDIO - Changes the audio or channel on DVD discs.
    • 10 REMOTE SETUP - Use to input the preset code when making remote control settings and to set the remote control mode (page 73).
    • 11 MULTI-ZONE operation selector switch
    • 12 Remote control LED
    • 13 u SOURCE
    • 14 MASTER VOLUME +/-
    • 15 MUTE
    • 16
    • Operating range of remote control unit
• Connecting your equipment
  • Rear panel
    • Important
    • CAUTION
  • Determining the speakers’ application
    • [1] 7.1ch surround connection (Simple connection & Best surround)
    • [2] 5.1ch surround & Front Bi-amping connection (High quality surround)
    • [3] 5.1ch surround & Zone 2 connection (Multi Zone)
    • [4] 5.1ch surround & Speaker B connection
    • Other speaker connection
  • Placing the speakers
    • Some tips for improving sound quality
  • Connecting the speakers
    • CAUTION
    • Bare wire connections
      • 1 Twist exposed wire strands together. (fig. A)
      • 2 Loosen terminal and insert exposed wire. (fig. B)
      • 3 Tighten terminal. (fig. C)
    • Banana plug connections
      • Important
      • CAUTION
  • Installing your speaker system
    • Standard 5.1/6.1/7.1-channel surround connections
    • Bi-amping your speakers
      • CAUTION
    • Bi-wiring your speakers
      • . To bi-wire a speaker, connect two speaker cables to the speaker terminal on the receiver.
      • CAUTION
  • Selecting the Surr Back system
    • Zone 2 setup
      • 1 Connect a pair of speakers to the surround back speaker terminals.
      • 2 Select ‘ZONE 2’ from the Surr Back System menu.
    • Speaker B setup
      • 1 Connect a pair of speakers to the surround back speaker terminals.
      • 2 Select ‘Speaker B’ from the Surr Back System menu.
    • Bi-Amping setup
      • 1 Connect a Bi-amp compatible speakers to the front and surround back speaker terminals.
      • 2 Select the ‘Front Bi-Amp’ setting from the ‘Surr Back System’ menu.
  • About the audio connection
  • Sound signal priority l
  • HDMI
  • HD audio
  • Digital (Coaxial)
  • Conventional digital audio
  • Digital (Optical)
  • RCA (Analog)
  • (White/Red)
  • Conventional analog audio
    • CAUTION
    • About the video converter
    • Connecting your TV and playback components
      • Connecting using HDMI
        • About HDMI
      • Connecting your DVD player with no HDMI output
      • Connecting your TV with no HDMI input
    • Connecting a satellite/cable receiver or other set-top box
    • Connecting a HDD/DVD recorder, VCR and other video sources
    • Connecting the multichannel analog inputs
    • Connecting other audio components
      • About the WMA9 Pro decoder
    • Connecting AM/FM antennas
      • 1 Pull off the protective shields of both AM antenna wires.
      • 2 Push open the tabs, then insert one wire fully into each terminal, then release the tabs to secure the AM antenna wires.
      • 3 Fix the AM loop antenna to the attached stand.
      • 4 Place the AM antenna on a flat surface and in a direction giving the best reception.
      • 5 Connect the FM wire antenna in the same way as the AM loop antenna.
      • Connecting external antennas
    • MULTI-ZONE setup
      • Making MULTI-ZONE connections
        • MULTI-ZONE listening options
        • Basic MULTI-ZONE setup (Zone 2)
          • . Connect a separate amplifier to the AUDIO ZONE2 OUT jacks and a TV monitor to the VIDEO ZONE2 OUT jack, both on this receiver.
        • MULTI-ZONE setup using speaker terminals (Zone 2)
          • . Connect a TV monitor to the VIDEO ZONE2 OUT jacks on this receiver.
    • Connecting an IR receiver
      • 1 Connect the IR receiver sensor to the IR IN jack on the rear of this receiver.
      • 2 Connect the IR IN jack of another component to the IR OUT jack on the rear of this receiver to link it to the IR receiver.
    • Operating other Pioneer components with this unit’s sensor
      • Important
      • 1 Decide which component you want to use the remote sensor of.
      • 2 Connect the CONTROL OUT jack of that component to the CONTROL IN jack of another Pioneer component.
    • Connecting your SiriusConnect™ Tuner
      • . Connect a SiriusConnect™ tuner to the SIRIUS IN jack on the rear of this receiver.
    • Connecting a component to the front panel inputs
    • Connecting an iPod
      • . Switch the receiver into standby then use the supplied iPod cable to connect your iPod to the iPod/iPhone/USB terminal on the front panel of this receiver.
    • Connecting a USB device
      • . Switch the receiver into standby then connect your USB device to the iPod/iPhone/ USB terminal on the front panel of this receiver.
    • Plugging in the receiver
      • . Plug the AC power cord into a convenient AC power outlet.
      • CAUTION
• Basic Setup
  • Switching the speaker impedance
    • 1 Switch the receiver into standby.
    • 2 While holding down ENTER on the front panel, press u STANDBY/ON.
  • Changing the OSD display language (OSD Language)
    • 1 Press on the remote control, then press HOME MENU.
    • 2 Select ‘System Setup’ from the HOME MENU.
    • 3 Select ‘OSD Language’ from the System Setup menu.
    • 4 Select the desired language.
    • 5 Select ‘OK’ to change the language.
  • Automatically setting up for surround sound (Auto MCACC)
    • Important
    • CAUTION
    • 1 Switch on the receiver and your TV.
    • 2 Connect the microphone to the MCACC SETUP MIC jack on the front panel.
    • 3 Select Surr Back System setting, select an MCACC preset, press and then select START.
    • 4 Follow the instructions on-screen.
    • 5 Wait for the test tones to finish, then confirm the speaker configuration in the GUI screen.
    • 6 Make sure ‘OK’ is selected, then press ENTER.
    • 7 The Auto MCACC Setup procedure is completed and the Home Menu menu reappears automatically.
    • Problems when using the Auto MCACC Setup
  • The Input Setup menu
    • 1 Switch on the receiver and your TV.
    • 2 Press on the remote control, then press HOME MENU.
    • 3 Select ‘System Setup’ from the HOME MENU.
    • 4 Select ‘Input Setup’ from the System Setup menu.
    • 5 Select the input function that you want to set up.
    • 6 Select the input(s) to which you’ve connected your component.
    • 7 When you’re finished, proceed to the settings for other inputs.
    • 8 When you’re finished, press RETURN.
    • Input function default and possible settings
• Basic playback
  • Playing a source
    • 1 Switch on your system components and receiver.
    • 2 Select the input function you want to play.
    • 3 Press AUTO/ALC/DIRECT (AUTO SURR/ ALC/STREAM DIRECT) to select ‘AUTO SURROUND’ and start playback of the source.
    • 4 Use the volume control to adjust the volume level.
    • Playing a source with HDMI connection
      • . Use INPUT SELECT to select the HDMI input you’ve connected to (for example, HDMI 1).
    • Selecting the multichannel analog inputs
      • 1 Make sure you have set the playback source to the proper output setting.
      • 2 Use INPUT SELECT to select MULTI CH IN.
  • Playing an iPod
    • 1 Switch on the receiver and your TV.
    • 2 Press iPod USB on the remote control to switch the receiver to the iPod/USB.
    • Playing back audio files stored on an iPod
      • Finding what you want to play
        • 1 Use i/j to select a category, then press ENTER to browse that category.
        • 2 Use i/j to browse the selected category (e.g., albums).
        • 3 Continue browsing until you arrive at what you want to play, then press d to start playback.
          • Tip
      • Basic playback controls
      • Switching the iPod controls
        • 1 Press iPod CTRL to switch the iPod controls.
        • 2 Press iPod CTRL again to switch back to the receiver controls.
  • Playing a USB device
    • 1 Switch on the receiver and your TV.
    • 2 Press iPod USB on the remote control to switch the receiver to the iPod/USB.
      • Important
    • Playing back audio files stored on a USB memory device
      • 1 Use i/j to select ‘Music’ from the USB Top menu.
      • 2 Use i/j to select a folder, then press ENTER to browse that folder.
      • 3 Continue browsing until you arrive at what you want to play, then press d to start playback.
      • Basic playback controls
    • Playing back photo files stored on a USB memory device
      • 1 Use i/j to select ‘Photos’ from the USB Top menu.
      • 2 Use i/j to select a folder, then press ENTER to browse that folder.
      • 3 Continue browsing until you arrive at what you want to play, then press d to start playback.
      • Basic playback controls
      • Slideshow Setup
        • 1 Use i/j to select ‘Slideshow Setup’ from the USB Top menu.
        • 2 Select the setting you want.
        • 3 When you’re finished, press RETURN.
    • About playable file formats
      • Music files
      • Photo files
  • Using SIRIUS Radio
    • . Press SIRIUS to switch to the SIRIUS input.
    • Listening to SIRIUS Radio
      • Selecting channels and browsing by genre
        • 1 Press i/j to enter the SIRIUS Channel Guide, then navigate through the channels one at time with i/j, then press ENTER to listen to the SIRIUS radio broadcast.
          • Tip
    • Saving channel presets
      • 1 Select the channel you want to memorize.
      • 2 Press T.EDIT.
      • 3 Press CLASS to select one of the seven classes, then press k/l to select the channel preset you want.
      • 4 Press ENTER.
        • Tip
      • Listening to channel presets
        • 1 Press CLASS to select the class in which the channel is stored.
        • 2 Press k/l to select the channel preset you want.
    • Using the SIRIUS Menu
      • 1 Press TOP MENU.
      • 2 Use i/j to select a menu item, then press ENTER.
      • 3 When you’re finished press TOP MENU to return to the reception display.
  • Listening to the radio
    • 1 Press TUNER to select the tuner.
    • 2 Use BAND to change the band (FM or AM), if necessary.
    • 3 Tune to a station.
    • Improving FM sound
    • Using Neural THX
    • Tuning directly to a station
      • 1 Press TUNER to select the tuner.
      • 2 Use BAND to change the band (FM or AM), if necessary.
      • 3 Press D.ACCESS (Direct Access).
      • 4 Use the number buttons to enter the frequency of the radio station.
    • Saving station presets
      • 1 Tune to a station you want to memorize.
      • 2 Press T.EDIT (TUNER EDIT).
      • 3 Press CLASS to select one of the seven classes, then press PRESET k/l to select the station preset you want.
      • 4 Press ENTER.
    • Naming station presets
      • 1 Choose the station preset you want to name.
      • 2 Press T.EDIT (TUNER EDIT).
      • 3 Input the name you want.
        • Tip
    • Listening to station presets
      • 1 Press TUNER to select the tuner.
      • 2 Press CLASS to select the class in which the station is stored.
      • 3 Press PRESET k/l to select the station preset you want.
• Listening to your system
  • Important
  • Auto playback
    • . While listening to a source, press , then press AUTO/ALC/DIRECT (AUTO SURR/ALC/STREAM DIRECT) for auto playback of a source.
    • Tip
  • Listening in surround sound
    • Standard surround sound
      • . While listening to a source, press , then press STANDARD (STANDARD SURROUND).
    • Using the Advanced surround effects
      • . Press , then press ADV SURR (ADVANCED SURROUND) repeatedly to select a listening mode.
      • Tip
  • Listening in stereo
    • . While listening to a source, press , then press STEREO for stereo playback.
  • Using Front Stage Surround Advance
    • . While listening to a source, press , then press STEREO to select Front Stage Surround Advance modes.
  • Using Stream Direct
    • . While listening to a source, press , then press AUTO/ALC/DIRECT (AUTO SURR/ALC/STREAM DIRECT) to select the mode you want.
  • Using surround back channel processing
    • . Press , then press SBch repeatedly to cycle the surround back channel options.
    • Using the Virtual Surround Back mode
      • . Press SBch repeatedly to cycle the virtual surround back channel options.
  • Setting the Up Mix function
    • 1 Switch the receiver into standby.
    • 2 While holding down ENTER on the front panel, press u STANDBY/ON.
    • 3 Press ENTER to confirm.
  • Selecting MCACC presets
    • . While listening to a source, press , then press MCACC.
  • Choosing the input signal
    • . Press , then press SIGNAL SEL to select the input signal corresponding to the source component.
  • Better sound using Phase Control
    • . Press , then press PHASE CTRL (PHASE CONTROL) to switch on phase correction.
• KURO LINK
  • Making the KURO LINK connections
    • Important
    • Cautions on the KURO LINK function
    • About connections with a product of a different brand that supports the KURO LINK function
  • KURO LINK Setup
    • 1 Press , then press Home Menu.
    • 2 Select ‘System Setup’, then press ENTER.
    • 3 Select ‘Other Setup’, then press ENTER.
    • 4 Select the ‘KURO LINK’ setting you want.
    • 5 Select the ‘Display Power Off’ setting you want.
    • 6 When you’re finished, press HOME MENU.
  • Setting the PQLS function
    • 1 Press , then press PQLS to select PQLS setting.
  • Before using synchronization
    • 1 Put all components into standby mode.
    • 2 Turn the power on for all components, with the power for the flat panel TV being turned on last.
    • 3 Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.
    • 4 Check whether the components connected to all HDMI inputs are properly displayed.
  • Synchronized amp mode
    • Synchronized amp mode operations
    • Canceling synchronized amp mode
• Using other functions
  • Setting the Audio options
    • Important
    • 1 Press , then press AUDIO PARAMETER.
    • 2 Use i/j to select the setting you want to adjust.
    • 3 Use k/l to set it as necessary.
    • 4 Press RETURN to confirm and exit the menu.
  • Setting the Video options
    • Important
    • 1 Press , then press VIDEO PARAMETER.
    • 2 Use i/j to select the setting you want to adjust.
    • 3 Use k/l to set it as necessary.
    • 4 Press RETURN to confirm and exit the menu.
  • Switching the speaker system
    • . Use SPEAKERS on the front panel to select a speaker system setting.
  • Using the MULTI-ZONE controls
    • 1 Press the MULTI-ZONE ON/OFF button on the front panel.
    • 2 Press MULTI-ZONE CONTROL on the front panel.
    • 3 Use the INPUT SELECTOR dial to select the source for the sub zone.
    • 4 Use the MASTER VOLUME dial to adjust the volume for the sub zone.
    • 5 When you’re finished, press MULTI-ZONE CONTROL again to return to the main zone controls.
    • MULTI-ZONE remote controls
  • Making an audio or a video recording
    • 1 Select the source you want to record.
    • 2 Prepare the source you want to record.
    • 3 Prepare the recorder.
    • 4 Start recording, then start playback of the source component.
  • Reducing the level of an analog signal
    • . Press , then press A.ATT to switch the input attenuator on or off.
  • Using the sleep timer
    • . Press , then press SLEEP repeatedly to set the sleep time.
  • Dimming the display
    • . Press , then press DIMMER repeatedly to change the brightness of the front panel display.
  • Checking your system settings
    • 1 Press , then press STATUS to check the system settings.
    • 2 When you’re finished, press STATUS again to switch off the display.
  • Resetting the system
    • 1 Switch the receiver into standby.
    • 2 While holding down ENTER on the front panel, press u STANDBY/ON.
    • 3 Select ‘RESET’ using PRESET +/-, then press ENTER on the front panel.
    • 4 Press ENTER to confirm.
    • Default system settings
• Controlling the rest of your system
  • Operating multiple receivers
    • 1 Check the operation selector switch to MAIN.
    • 2 Press .
    • 3 Press and hold REMOTE SETUP, then release it after the LED flashes twice.
    • 4 Use the number buttons to enter the 5- digit preset code (see below).
  • Setting the remote to control other components
    • Note
  • Selecting preset codes directly
    • 1 Press the input function button for the component you want to control.
    • 2 Press and hold REMOTE SETUP, then release it after the LED flashes twice.
    • 3 Use the number buttons to enter the 5- digit preset code.
    • 4 Repeat steps 1 through 3 for the other components you want to control.
  • Resetting the remote control presets
    • 1 Check the operation selector switch to MAIN.
    • 2 Press .
    • 3 Press and hold REMOTE SETUP, then release it after the LED flashes twice.
    • 4 Use the number buttons to enter 9, 8, 1.
    • Default preset codes
  • DVD
  • 31571
  • BD
  • 32442
  • DVR
  • 22306
  • HDMI
  • 32442
  • TV
  • 14001
  • CD
  • 70468
  • CD-R
  • 71087
  • VIDEO
  • 20058
  • TV CTRL
  • 14001
  • 61935
    • Controls the components
  • a. Controls for SACD.
  • b. Controls for MD.
• The Advanced MCACC menu
  • Making receiver settings from the Advanced MCACC menu
    • 1 Switch on the receiver and your TV.
    • 2 Press on the remote control, then press HOME MENU.
    • 3 Select ‘Advanced MCACC’ from the HOME MENU, then press ENTER.
    • 4 Select the setting you want to adjust.
  • Automatic MCACC (Expert)
    • Important
    • CAUTION
    • THX®
      • 1 Select ‘Auto MCACC’ from the Advanced MCACC menu, then press ENTER.
      • 2 Select the parameters you want to set.
      • 3 Connect the microphone to the MCACC SETUP MIC jack on the front panel.
      • 4 When you’re finished settings the options, select START then press ENTER.
      • 5 Follow the instructions on-screen.
      • 6 Wait for the Auto MCACC Setup to finish outputting test tones.
      • 7 If necessary, confirm the speaker configuration in the GUI screen.
      • 8 Make sure ‘OK’ is selected, then press ENTER.
      • 9 The Auto MCACC Setup procedure is completed and the Advanced MCACC menu reappears automatically.
  • Manual MCACC setup
    • CAUTION
    • Important
    • 1 Select ‘Manual MCACC’ from the Advanced MCACC menu.
    • 2 Select the setting you want to adjust.
    • Fine Channel Level
      • 1 Select ‘Fine Channel Level’ from the Manual MCACC setup menu.
      • 2 Adjust the level of the left channel.
      • 3 Select each channel in turn and adjust the levels (+/-10.0 dB) as necessary.
      • 4 When you’re finished, press RETURN.
    • Fine Speaker Distance
      • 1 Select ‘Fine SP Distance’ from the Manual MCACC setup menu.
      • 2 Adjust the distance of the left channel from the listening position.
      • 3 Select each channel in turn and adjust the distance as necessary.
      • 4 When you’re finished, press RETURN.
    • Standing Wave
      • 1 Select ‘Standing Wave’ from the Manual MCACC setup menu.
      • 2 Adjust the parameters for the Standing Wave Control.
      • 3 When you’re finished, press RETURN.
    • Acoustic Calibration EQ Adjust
      • 1 Select ‘EQ Adjust’ from the Manual MCACC setup menu.
      • 2 Select the channel(s) you want and adjust to your liking.
        • Tip
      • 3 When you’re finished, press RETURN.
    • Acoustic Calibration EQ Professional
      • How to use Acoustic Calibration EQ Professional
      • Using Acoustic Calibration EQ Professional
        • 1 Select ‘EQ Professional’, then press ENTER.
        • 2 Select an option and press ENTER.
        • 3 If you selected ‘Reverb Measurement’, select EQ ON or OFF, and then START.
        • 4 If you selected ‘Reverb View’, you can check the reverb characteristics for each channel. Press RETURN when you’re done.
        • 5 If ‘Advanced EQ Setup’ is selected, select the MCACC memory to be stored, then enter the desired time setting for calibration, and then select START.
  • Checking MCACC Data
    • 1 Press , then press HOME MENU.
    • 2 Select ‘MCACC Data Check’ from the HOME MENU.
    • 3 Select the setting you want to check.
    • 4 Press RETURN to go back to MCACC Data Check menu, repeating steps 2 and 3 to check other settings.
    • 5 When you’re finished, press RETURN.
    • Speaker Setting
      • 1 Select ‘Speaker Setting’ from the MCACC Data Check menu.
      • 2 Select the channel you want to check.
    • Channel Level
      • 1 Select ‘Channel Level’ from the MCACC Data Check menu.
      • 2 When ‘MCACC’ is highlighted, use k/l to select the MCACC preset you want to check.
    • Speaker Distance
      • 1 Select ‘Speaker Distance’ from the MCACC Data Check menu.
      • 2 When ‘MCACC’ is highlighted, use k/l to select the MCACC preset you want to check.
    • Standing Wave
      • 1 Select ‘Standing Wave’ from the MCACC Data Check menu.
      • 2 When ‘Filter Channel’ is highlighted, use i/j to select the channel for which you want to check standing wave control.
      • 3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to check.
    • Acoustic Cal EQ
      • 1 Select ‘Acoustic Cal EQ’ from the MCACC Data Check menu.
      • 2 When ‘Ch’ is highlighted, use i/j to select the channel.
      • 3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to check.
  • Data Management
    • 1 Press , then press HOME MENU.
    • 2 Select ‘Data Management’ from the HOME MENU.
    • 3 Select the setting you want to adjust.
    • Renaming MCACC presets
      • 1 Select ‘Memory Rename’ from the Data Management setup menu.
      • 2 Select the MCACC preset you want to rename, then select an appropriate preset name.
      • 3 Repeat for as many MCACC presets as necessary, then press RETURN when you’re finished.
    • Copying MCACC preset data
      • 1 Select ‘MCACC Memory Copy’ from the Data Management setup menu.
      • 2 Select the setting you want to copy.
      • 3 Select the MCACC preset you’ll be copying the settings ‘From’, then specify where you want to copy them (‘To’).
      • 4 Select ‘OK’ to confirm and copy the settings.
    • Clearing MCACC presets
      • 1 Select ‘MCACC Memory Clear’ from the Data Management setup menu.
      • 2 Select the MCACC preset you want to clear.
      • 3 Select ‘OK’ to confirm and clear the preset.
• The system and the other setup
  • Making receiver settings from the System Setup menu
    • 1 Switch on the receiver and your TV.
    • 2 Press , then press HOME MENU.
    • 3 Select ‘System Setup’ from the HOME MENU, then press ENTER.
    • 4 Select the setting you want to adjust.
  • Manual speaker setup
    • CAUTION
    • 1 Select ‘Manual SP Setup’, then press ENTER.
    • 2 Select the setting you want to adjust.
    • 3 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.
    • Surround back speaker setting
      • 1 Select ‘Surr Back System’ from the Manual SP Setup menu.
      • 2 Select the surround back speaker setting.
      • 3 When ‘Setting Change?’ is displayed, select Yes.
    • Speaker Setting
      • 1 Select ‘Speaker Setting’ from the Manual SP Setup menu.
      • 2 Choose the set of speakers that you want to set, then select a speaker size.
      • 3 Select ‘X. OVER’ and set the crossover frequency.
      • 4 When you’re finished, press RETURN.
    • Channel Level
      • 1 Select ‘Channel Level’ from the Manual SP Setup menu.
      • 2 Select a setup option.
      • 3 Confirm your selected setup option.
      • 4 Adjust the level of each channel using k/ l.
      • 5 When you’re finished, press RETURN.
        • Tip
    • Speaker Distance
      • 1 Select ‘Speaker Distance’ from the Manual SP Setup menu.
      • 2 Adjust the distance of each speaker using k/l.
      • 3 When you’re finished, press RETURN.
        • Tip
    • X-Curve
      • 1 Select ‘X-Curve’ from the Manual SP Setup menu.
      • 2 Choose the X-Curve setting you want.
      • 3 When you’re finished, press RETURN.
  • The Other Setup menu
    • 1 Press on the remote control, then press HOME MENU.
    • 2 Select ‘System Setup’ from the HOME MENU.
    • 3 Select ‘Other Setup’, then press ENTER.
    • 4 Select the setting you want to adjust.
    • 5 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.
    • Multi Channel Input Setup
      • 1 Select ‘Multi Ch In Setup’ from the Other Setup menu.
      • 2 Select the ‘SW Input Gain’ setting you want.
      • 3 Select the ‘Video Input’ setting you want.
      • 4 When you’re finished, press RETURN.
    • ZONE Audio Setup
      • 1 Select ‘ZONE Audio Setup’ from the Other Setup menu.
      • 2 Select the volume level setting of ZONE 2.
      • 3 When you’re finished, press RETURN.
    • Power ON Level Setup
      • 1 Select ‘Power ON Level Setup’ from the Other Setup menu.
      • 2 Select the Power ON Level setting you want.
      • 3 When you’re finished, press RETURN.
    • Volume Limit Setup
      • 1 Select ‘Volume Limit Setup’ from the Other Setup menu.
      • 2 Select the Volume Limit setting you want.
      • 3 When you’re finished, press RETURN.
    • Remote Control Mode Setup
      • 1 Select ‘Remote Control Mode Setup’ from the Other Setup menu.
      • 2 Select the Remote Control Mode setting you want.
      • 3 Select “OK” to change the remote control mode.
      • 4 Follow the instructions on the screen to change the remote control’s setting.
      • 5 When you’re finished, press RETURN.
    • Flicker Reduction Setup
      • 1 Select ‘Flicker Reduction Setup’ from the Other Setup menu.
      • 2 Select the Flicker Reduction setting you want.
      • 3 When you’re finished, press RETURN.
      • General
      • Plasma Television
      • LCD
      • HDTV
      • Rear Projection TV
      • TV/DVD Combination
      • TV/VCR Combination
      • General
      • PVR
      • General
      • Blu-ray
      • HD-DVD
      • DVD-R
      • DVD/PVR Combination
      • DVD/VCR Combination
      • General
      • CD-R
      • MD
      • General
      • SAT/PVR Combination
      • General
      • Cable/PVR Combination
• Additional information
  • Troubleshooting
    • Note
    • Power
    • No sound
    • Other audio problems
    • Video
    • Settings
    • Professional Calibration EQ graphical output
    • Display
    • Remote control
    • HDMI
    • Important information regarding the HDMI connection
      • Configuration A
        • Note
      • Configuration B
        • Note
    • USB interface
    • SIRIUS radio messages
  • Surround sound formats
    • Dolby
    • DTS
    • Windows Media Audio 9 Professional
  • About iPod
  • About SIRIUS
  • About Neural - THX Surround
  • Auto Surround, ALC and Stream Direct with different input signal formats
    • Stereo (2 channel) signal formats
    • Multichannel signal formats
  • Preset code list
  • Specifications
    • Amplifier section
    • Audio Section
    • Tuner Section
    • Video Section
    • Digital In/Out Section
    • Integrated control section
    • Miscellaneous
    • Furnished Parts Number
      • Note
  • Cleaning the unit