Panasonic RX-EX1 - Manual (Page 10)

RQT5671
10
Listening
CDs
Press [POWER, ] to turn the unit on.
Press [ 9 99 9 9 TAPE/CD] to switch to CD mode.
Each time the button is pressed
TAPE
CD
Press [
/ / / / / CD] to open the tray, load a CD, and
press [ / / / / / CD] to close the tray.
Press [ B B B B B/;;;;; CD] to start play.
Plays to the end of the CD and stops.
Turn [– " " " " " VOLUME # # # # # +] to adjust the volume.
To stop play
Press [ TAPE/CD].
One touch play (When using AC power)
When a CD is loaded, press [ CD].
The unit comes on and play starts.
To pause play
Press [ CD] during play.
Press again to resume play.
To skip tracks
Press [REW/–/ ] (backward) or [ /+/FF] (forward).
Searching through tracks
Press and hold [REW/–/ ] (backward) or [ /+/FF]
(forward) during play.
If this unit causes interference to other equipment (radios
and televisions) separate it from the equipment.
CD selection
Choose CDs with this mark: ( )
This unit can play CD-DA format audio CD-R and CD-RW
that have been finalized upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
Finalizing is a process that enables CD-R/CD-RW players
to play audio CD-R and CD-RW.
Do not
•use irregularly shaped CDs ( ).
•use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers. ( )
•attach scratch-proof covers or any other kind of accessory.
•write anything on the CD.
•clean CDs with liquids. (Wipe with a soft, dry cloth.)
•use CDs printed with label printers available on the mar-
ket.
PGM
ALL
RANDOM
1 - 1
SLEEP PLAY
REC
FADER RE
PGM
PGM
ALL
RANDOM
1
EQ ON
MONO
ST -REC 1
SLEEP PLAY
REC
FADER RE
EQ ON
MONO
ST REC
ALL
RANDOM
1
EQ ON
MONO
ST -REC 1
SLEEP PLAY
REC
FADER RE
ALL
RANDOM
1 - 1
SLEEP PLAY
REC
FADER RE
PGM
EQ ON
MONO
ST REC
Displayed when CD not loaded
Track Playing Elapsed time
Number of tracks Total playing time
Label
re-ex1(p10-p15)[P] 00.12.28, 4:58 PM 10