The sleep timer, The timer fader, Timer – Panasonic RX-EX1 User Manual

Page 20: Using the timer, Press [sleep] to select the time (in minutes), Press [timer fader] to display

Advertising
background image

RQT5671

20

Timer

Y

Y

ALL

RANDOM

1

-

1

PLAY

REC

FADER

RE

PGM

EQ ON

MONO

ST

REC

ALL

RANDOM

1

-

1

PLAY

REC

RE

PGM

EQ ON

MONO

ST

REC

SLEEP

FADER

SLEEP

Using the Timer

To check the settings (when unit is off)

Press [CLOCK/TIMER].
The settings are shown in the following order:
Start time, Finish time

Source

Volume

Clock

To change the settings (when unit is on)

To change the times
Do steps , , , and .
To change the source or volume
1. Press [

PLAY/REC] to clear the timer indicator.

2. Make changes to the source or volume.
3. Do steps to .

You can enjoy other sources after you have set
the timer.

Turn the unit off before the timer’s start time.

The play and record timers cannot be used together.

The Sleep Timer

Remote control only
Set the unit to stop and turn off after a certain time.

While listening to a CD, a cassette, or the radio.

Press [SLEEP] to select the time (in minutes).

Each time the button is pressed

SLEEP 30 SLEEP 60 SLEEP 90
SLEEP OFF SLEEP 120

To cancel

Press [SLEEP] to select “SLEEP OFF”.

To check the remaining time

Press [SLEEP] once.
The remaining time is shown for about 5 seconds.

To change the time.

Press [SLEEP] to select the new time.

The sleep timer can be used in combination with the play
and record timers. Make sure the unit is off before the play
or record timer's set start time.

The Timer Fader

Remote control only

Volume increases slowly to the set level when a timer turns
the unit on and decreases slowly when the sleep timer
turns the unit off.

Press [TIMER FADER] to display

.

(All timers will be affected.)
Press again to cancel.

This feature does not affect record timer’s recordings.

re-ex1(p16-p22)[P]

00.12.28, 4:53 PM

20

Advertising