PVI Industries PV500-25 - Manual (Page 4)

QUICKDRAW

Steam Heater
4
PV500-25 06/12
2 PRODUCT DESCRIPTIONS
Typical QuickDraw ® Storage Construction
1. U-tube Heat Exchanger 12. Main Steam Trap *
2. Control Enclosure 13. Auxiliary Steam Trap **
3. Potable Water Inlet 14. Y-Strainer *
4. Potable Water Outlet 15. Condensate Y-Strainer **
5. Intra-tank Circulator * 16. Condensate Drain **
6. Relief Valve (CSA *) 17. Tank Purge Valve *
7. Shutoff Valve **
8. Tank Drain Valve * Optional
9. Steam Inlet ** Supplied by Others
10. Steam Pressure Gauge * (shown with dashed lines)
11. Steam Valve
Note: Components, controls and connection locations may vary.