Checking the main unit's keys – Panasonic SJ-MJ88 User Manual

Page 32

Advertising
background image

4. Press

key (“AOK ” or “ANG ” changes to “T2E ”).

5. After the adjustment is finished, remove the disc.

6.2.5. Playback-only disc automatic adjustment

1. Have “T3E ” indicated on display, set the playback-only disc.

(Check to make sure the disc is properly seated.)

2. Press

key of the remote controller. The adjustment is started.

3. During adjustment. “AADJ ” is displayed on the LCD of the remote controller.

If there is no abnormality, “AOK ” will be displayed.

Note:
If it is displayed “ONG ”, check “7. Troubleshooting Guide” in the order.

4. Press

key (“OOK ” or “ONG ” changes to “T3E ”).

5. After the adjustment is finished, remove the disc.

6.2.6. How to get out the adjustment mode

Remove the battery when you finish the adjustment.

6.3. Checking the main unit's keys

1. Set the battery and connect the remote controller.

2. Turn off the power, and switch main unit’s HOLD switch OFF.

3. Press the VOL+, VOL-,

, and

keys on the remote controller within

two seconds. (as shown in

Fig. 5

)

4. When the unit enters the unit key check mode, the display shows “T KEX ”.

While “T KEX ” is displayed, press the

,

,

and VOL(+, -) keys

of the unit in the specified order and then switch off the HOLD switch.
*When thefirst

key is pressed, the display will change to “T ”.

32

Advertising