Panasonic AJ-PCS060G - Manual (Page 12)

E-11
Control reference guide (continued)
Top
START button
Press to start copying or formatting.
Hold the [START] button for at least 2 seconds
to start either process.
CANCEL button
Press to cancel copying.
During copying, hold the [CANCEL] button for at
least 2 seconds to cancel copying.
Sliding knob
To open the front panel cover, slide the knob in
the direction of the arrow.
Battery level indicator button [ ]
After this button is pressed, the remaining power
level of the battery pack will be displayed for
about 2 seconds in
, the [REMAIN] indicator.
(See page E-15)
The [USB] indicator remains lit (green) as long
as a USB 2.0 cable is connected.
HDD capacity indicator button [HDD
CAP]
After this button is pressed, the available HDD
capacity will be displayed for about 2 seconds in
, the [REMAIN] indicator.
The number in [REMAIN] represents how many
cards can be copied to the HDD.
(See page E-14)
The [USB] indicator remains lit (green) as long
as a USB 2.0 cable is connected
.
Battery/HDD indicator and error LEDs
[REMAIN]
Indicates the remaining battery level, available
HDD capacity, and, if errors occur, error
identification.
(See pages E-14, E-15, E-29 to E-31)
USB 2.0 connector (Type B)
When connecting the unit to a computer, plug
the USB 2.0 cable into this connector.
Note:
Computers used with the unit must support
USB 2.0.
Right side