Panasonic AJ-PCS060G - Manual (Page 15)

E-14
ENGLISH
Capacity
(No. of cards that
can be copied)
Write-protect switch settings
Data cannot be written to or deleted from
the card.
Data may be written to or deleted from
the card.
PROTECT
PROTECT
Copying (continued)
Up to 15 P2 cards worth of data can be copied to the unit's internal HDD. (However, in the case
of 8 GB P2 cards, the data on only 7 P2 cards can be copied.) To see how much space is
available on the HDD (how many cards can be copied), press the [HDD CAP] button and check
the [REMAIN] indicator.
See
HDD Capacity (in Number of Cards)
With the unit ON, check how many P2 cards can be copied
• When using 2 GB or 4 GB P2 cards:
Press the [HDD CAP] button once. In [REMAIN], [E1] lights in orange for a second. After
this, the display corresponds to information given in
HDD Capacity (in Number of Cards) ,
below.
• When using 8 GB P2 cards:
Press the [HDD CAP] button twice. In [REMAIN], [E1] and [E2] light in orange for a
second. After this, the display corresponds to information given in
HDD Capacity (in Number
of Cards) , below.
HDD Capacity (in Number of Cards)
The [REMAIN] indicator goes out after about 2 seconds.
When P2 cards are inserted, the following operations will be prevented to protect the data, even if
you adjust the write-protect switch. Thus, check the write-protect switch before inserting P2
cards.
Write-protection on P2 cards
HDD capacity indicator
REMAIN
R
G
G
G
G
G
0
2
1
3
4
5 or more
Full useable
(when the cards are not in use)
R
G
G
G
G
R
G
G
G
R
G
G
R
G G G G G
G
: LED lit : LED flashing
R : red G : green