Panasonic WJ-RT208 - Manual (Page 14)

The WJ-RT208 is used to connect cameras, microphones, monitors, VGA monitors, PCs, networks, cameras, external HDDs,
and more. (According to the interface type, some devices cannot be connected.)
In regard to two types of system configurations and connections, a brief explanation is given below. In regard to more compli-
cated system connections as well as the system connections not introduced in this Operating Instructions, refer all work relat-
ed to the connection of this product to qualified service personnel or system installers.
<Basic System>
■ Example for Basic System Connections
● Basic Connection
Cautions:
q Camera cable length (BNC) is a maximum of 500 m.
w The audio signals from a microphone are firstly amplified at the amplifier and then fed to the WJ-RT208.
14
System Composition and Connections
Camera Camera
Microphones
ERROR
ALARM
HDD
TIMER
OPERATE
1 2 3 4 5
6 7 8 9 0
MENU
ESC
ALARM RESET SEQUENCE STILL
PAUSE REV FWD SKIP
STOP PLAY REC
COPY 2
SET
Amplifier
Digital Disk Recorder WJ-RT
208 208