Panasonic WJ-RT208 - Manual (Page 50)

50
Setting item
Setup Menu Parameters and Initial Setup Values
1. System Management (SYSTEM MANAGEMENT)
1.1 System Setup (SYSTEM SETUP)
1.2 Disk Information (DISK INFORMATION)
1.3 Reboot System (REBOOT SYSTEM)
1.4 CH1 Picture Adjustment (PICTURE ADJUST)
Note: The parameters for this unit can be defined for each channel.
1.5 Time & Date (TIME & DATE)
1.6 Version Information (VERSION)
Setting item
"Power On Rec."
"Seq. Dwell"
"Off"
"05"
"Off/On"
"02 - 30"
"Video Format" "NTSC" "NTSC (fixed)"
"Overwrite" "On" "Off/On"
"Status Display" "All" "All/Stat/None/Name"
"Keylock Time" "600" "005 - 999"
"Keylock Buzz" "On" "Off/On"
"Alarm Buzz" "Off" "Off/On"
"Pre Recording" "Off" "Off/On"
"Rec. Quality" "Normal" "SP Fine/Fine/Good/Normal/Extended"
"I Frame Inter." "04" "01 - 15"
"Resolution" "800 x 600" "800 x 600/1024 x 768"
"Alarm Spot" "Off" "Off/On"
"Stream Type" "CBR" "CBR/VBR"
"Alarm Input" "N.O." "N.O./N.C."
"Frame Rate" "Full" "Full/1/2F/1/4F/1/8F/1/16F"
Possible displayed contents
"No disk detected"
"Disk not format"
"Disk access error"
"Disk fatal error"
"Contrast"
"Brightness"
"Color"
"Saturation"
Default setting
71
74
50
65
Available values
00 - 99
00 - 99
00 - 99
00 - 99
Setting item
YYYY-MM-DD - HH:MM:SS
Default setting
–
Available values
2000/01/01 00:00:00 - 2100/12/31 23:59:59
Default setting Available values
Setting item
"Current Version"
Default setting
–
Available values
– (Fix)