Polycom KIRK 4020 - Manual (Page 22)

22
7.5.1 Create subscription
To make subscriptions, the system must allow subscriptions to be made. Some systems also require an Access
Code (AC). If more than one system currently permits subscription, you will need to know the ID of the system to
which you wish to subscribe. Access Codes and system ID’s will be provided by the system administrator.
Choose the “SUBSCRIPTION CREATE” function to subscribe to a new system (see Chap. 7.5/7.5.4).
Use the < and > keys to scroll between the ID’s of the different systems available.
During subscription the handset will search for free positions and perform subscription on the first free position.
An alternative position can be choosen using < or >. Enter the AC (if required) using the keyboard, and press
3.
If the subscription was successful, the startup text will be replaced by the standby text given into the system by the
system administrator and
is shown in the display. If not, the subscription has failed and the procedure must
be retried.
If the handset is already subscribed to 10 systems, you will have to remove a subscription before creating a new
subscription (see Chap. 7.5.3).
1408 8700-ed9:1408 8700-ed9.qxd 28-05-2009 11:25 Side 22