Planet Technology DVR-460 - Manual (Page 15)

3.3 External Device Connections
3.3.1 IR Transmitter
Please connect the IR receiver line to the IR port on the DVR rear panel. And make sure the
IR function is activated in the DVR menu (The default setting is on). Please refer to the
following figure as an example.
3.4 Power Setup
This device should be operated only with the type of power source indicated on the
manufacturer’s label. Connect the indicated AC power cord to the power adapter, and plug
into an electrical outlet. The power LED “
” will be on as green. It takes approximately 10
to 15 seconds to boot the system.
3.5 Date and Time Setting
Before operating your DVR, please set the date and time on your DVR first.
Press the “MENU” button and enter the password to go to the menu list. The default admin
password is 0000. Move the cursor to “DATE” and you can set the date / time / daylight
saving in the “DATE” menu list.
4-CH MPEG-4 Digital Video Recorder 15