Planet Technology DVR-460 - Manual (Page 44)

DVR-460 User Guide 44
‧ Record type
‧ Hard disk overwriting
‧ Pre- / post-alarm record time
‧ Record time setting
‧ Record path
If “Manual” is checked, click “ ” (Record) on the main control panel to start the manual
recording immediately, and the recordings will be saved in the specified location. The red
text indication “REC” will be shown at the top left corner of the image display view.
If “Motion” and / or “Alarm” are checked, the recording function will also be enabled at the
remote side when any event is triggered at the DVR side, and the recordings will be saved
se see “Record Setting”.
ing, click
in the specified location.
For details, plea
Playback
To play a record “ ” (Miscellaneous Control) → “ ” (Status List), and select
e “Record” tab or “Backup” tab. A list of all the recordings will be shown by defaults, and
you
th
you can also sort out the logs
want to speed up the search time.
For details, please see “Status List”.
Note:
You can’t select a single channel for video playback. During the playback mode, you can only see
the quad view.
To immediately play a recording, select a log from the list, and click “Play” button, or