Planet Technology DVR-460 - Manual (Page 9)

4-CH MPEG-4 Digital Video Recorder 9
9) SEQ /＋
Press “SEQ” button to activate the call monitor function, and press again to quit.
Press ”＋” button to change the setting in the menu.
10) Power
Press this button long enough to turn on/off your DVR.
Note:
Under the recording mode, please stop recording before turning off your DVR.
11) 1 / 2 / 3 / 4
Press one of these buttons to show the channel display of CH1 ~ CH4 on the monitor.
12)
Press this button to play the recorded video.
13) Pause / Stop / Rew / FF
Under the playback mode:
Press one of these button to pause / stop / rewind / fast-forward the playback file.
14) Up / Down / Left / Right
Press one of these direction buttons to move the cursor up/down/left/right.
Under the DVR menu mode, these direction buttons can use for the following operation:
Up / Down: Make the selection / Change the settings
Left / Right: Make the selection
15)
SLOW ZOOM
AUDIO
(Audio)
Press these two buttons at the same time to select live or playback sounds of the audio
channels.
16)
SEQ.
P.T.Z
(PTZ)
Press these two buttons at the same time to enter / exit the PTZ control mode.
In the PTZ control mode → Zoom in: Press "＋" button ; Zoom out: Press "－" button
Adjust PTZ angle: Press direction buttons to turn up/down/left/right
17) “MENU” + “ENTER” (Key lock)
Press these two buttons at the same time to lock keys on the DVR front panel.