Planet Technology DVR-460 - Manual (Page 18)

DVR-460 User Guide 18
Note:
There must be at least 8192 images of recorded data for playback to work properly. If not, the
device will stop playback. For example, if the IPS is set to 30, the recording time should be at least
273 seconds (8192 images / 30 IPS) for the playback to work properly.
1) Fast Forward / Fast Rewind
You can increase the speed for fast forward and rewind on this device. In the playback
mode:
Press “FF“ once to get 4X speed forward and press twice to get 8X speed, etc. And the
maximum speed is 32X.
Press “REW“ once to get 4X speed rewind and press twice to get 8X speed, etc. And
the maximum speed is 32X.
Note:
During playback, the image size of the recording (CIF) will be shown on the screen.
2) Pause / Image Jog
Press “PAUSE” button to pause the playback.
In the pause mode:
Press “►” button once to get one frame forward.
Press “◄” button once to get one frame rewind.
3) Stop
Pressing “STOP” button under playback mode, the screen of this device will return to
live monitoring mode.
4) Slow Playback
Press “SLOW” button to get 1/4X speed playback and press twice to get 1/8X speed
playback.
5) Audio Playback
Use these two buttons
SLOW ZOOM
AUDIO
to select the live or playback sound of the audio
channels.
Live audio of the 1st audio channel Playback audio of the 1st audio channel
ote: N
If you want to make a video backup with audio, please connect your camera which supports the
audio function to CH1 first.