Panasonic BL-PA300A - Manual (Page 15)

15 [For assistance, please call: 1-800-272-7033]
Useful Information
Useful Information Testing a terminal’s network speed
Once you have connected the adaptors where you plan to use them, follow
the procedure below to test the speed of each terminal’s network connection
to the master. Make sure that the terminal has already been registered to a
master (see page 11).
1. Press and hold the terminal’s SETUP button for about 1 second.
• The indicators light one at a time.
2. After a few seconds, the network speed test result is displayed.
3. Refer to the chart below to determine the network speed.
PLC LAN MASTER
PLC LAN MASTER Result Speed
No link — *1
Good
Less than
10 Mbps *1
Better
10 Mbps to
30 Mbps *1
Best
More than
30 Mbps *1
BL-PA300A_OI.book Page 15 Wednesday, August 6, 2008 9:59 AM