Paxar 545 - Manual (Page 38)

36 • Printer Operation / Adjustments Users Manual Model 545™
-10 +10
11) On the front panel adjust STATION 2 DOT SHIFT to cause station 2’s web
print line to be directly over station 1’s web print line.
-16
+16
Sensor Calibration
The optical sensors used to detect error conditions in production can be calibrated
without the use of a multi-meter via the front panel. One may need to be calibrated
if it has just been replaced or put into service. Refer to the Front Panel Mode
Descriptions under the Control Panel Operation section.