Paxar 545 - Manual (Page 39)

Users Manual Model 545™ Control Panel Operation • 37
Control Panel Operation
Control Buttons
Start
- Starts the printer.
- ON LINE light must be GREEN.
(Batches downloaded to be printed)
- If “Stopped For Splice” error condition exists: Fabric will be advanced
until the splice is beyond the print stations. Labels between the heads and
knife will be reproduced and stacked as finished labels.
Feed
- FEED and START must both be used.
- Feed will stop when the buttons are released.
- Labels between the heads and knife will be cut and stacked as finished
labels.
- Fabric moves through in one continuous strip.
- Fabric moves through without printing.
Test
- TEST and START must both be used.
- Test will stop when the buttons are released.
- Labels between the heads and knife will be cut and stacked as finished
labels.
- Fabric moves through in one continuous strip.