ª inserting a button-type battery, ª using the remote controller 1, While pressing the stopper – Panasonic AG-EZ50UP User Manual

Page 11: Pull out the battery holder, Warning, Selecting remote controller modes

Advertising
background image

11

1

3

2

1

1

2

1

ZOOM

INDEX

INDEX

SELECT

STORE

STOP

K

L

OSD

COUNTER

V

/REW

STILL ADV

OFF/ON

P.B.DIGITAL

DATE/

TIME

RESET

TITLE

T

W

s

VO

L

r

¥

REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

VIDEO CAMERA

A.DUB

PLAY

PAUSE

FF/

W

STILL ADV

MENU

ITEM

SET

6

1

5

;

E

D

VAR.

SEARCH

P.B.

ZOOM

ª Inserting a Button-type Battery

Before using the remote controller, insert the supplied button-type battery.

1

While pressing the Stopper

1

, pull out the Battery Holder.

2

Insert the button-type battery with the imprint (

i) facing

upward.

3

Insert the Battery Holder into the Remote Controller.

≥When the button-type battery becomes weak, replace it with a new CR2025

battery. (A battery is normally expected to last about one year. However, it
depends on operation frequency.)

≥Make sure to match the poles properly when inserting the battery.

.........................................................................................................................

Warning

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
equipment manufacturer. Discard used batteries according to
manufacturer’s instructions.
Risk of fire, explosion and burns. Do not recharge, disassemble, heat
above 212°F (100°C) or incinerate. Keep the Button-Type battery out of
the reach of children. Never put Button-Type battery in mouth. If
swallowed call your doctor.

.........................................................................................................................

Replace battery with CR2025 only. Use of another battery may present a
risk of fire or explosion.
Caution-Battery may explode if mistreated.
Dispose of used battery promptly. Keep away from children. Do not
recharge, disassemble or dispose of in fire.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ª Using the Remote Controller
1

Direct the Remote Controller to the Remote Control Sensor
on the Camera/Recorder and press the desired button.

≥Distance from the Camera/Recorder: Within Approximately 15 feet

(5 meters)

≥Angle: Approximately 15 degrees in the vertical and horizontal

directions from the central axis

≥The above operating ranges are for indoor use. Outdoors or under strong

light, the equipment may not operate properly even within the above
ranges.

≥Within 3 feet (1 meter) range, you can also use the Remote Controller on

the side (the LCD Monitor side) of the Camera/Recorder.

Selecting Remote Controller Modes

When 2 Camera/Recorders are used simultaneously, they can be operated
individually by selecting different Remote Controller Modes.
≥If the Remote Controller Mode on the Camera/Recorder and Remote

Controller do not match, [REMOTE] is displayed.

Setting on the Camera/Recorder:
Set [REMOTE] on the [OTHER FUNCTIONS] Sub-Menu to the desired
Remote Controller Mode.

Setting on the Remote Controller:

[VCR1]: Press the [

D] Button and [∫] Button simultaneously.

1

[VCR2]: Press the [

E] Button and [∫] Button simultaneously.

2

≥When the battery in the Remote Controller is replaced, the Mode is

automatically reset to [VCR1] Mode.

Advertising