Panasonic AG-EZ50UP - Manual (Page 24)

24
MNL
1/60
2, 3
1
AUTO
MANUAL
AE LOCK
VOL/JOG
PUSH
AUTO
MANUAL
AE LOCK
AE LOCK
1 2
W T
1/60
F2.4
0dB
Manual Shutter Speed Adjustment
Useful for Recording fast-moving subjects.
1 Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2 Press the [PUSH] Dial repeatedly until the shutter speed
display appears.
3 Rotate the [PUSH] Dial to adjust the shutter speed.
The Range of Shutter Speed Adjustment
1/60-1/8000 (or 1/60-1/500: for Card Photoshot Recording)
The standard shutter speed is 1/60.
Selecting a speed closer to [1/8000] causes the shutter speed to be faster.
≥When you are using progressive function or card photoshot recording, a
speed only up to 1/500 can be used.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO]. Or, Hold down the [PUSH] Dial.
≥For other notes, see page 47.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Manual Iris Adjustment
(F Number)
You can use this function when the screen is too bright or too dark.
1 Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2 Press the [PUSH] Dial repeatedly until the Indication 1
appears.
3 Rotate the [PUSH] Dial to adjust the iris.
Adjustable Range of the Iris
CLOSE (Closed)
)F16...F1.7 )
OPEN (Opened) 0dB
)OPEN 3dB... )OPEN18dB
When a value closer to [CLOSE] is selected, the image becomes darker.
When a value closer to [OPEN18dB] is selected, the image becomes
brighter.
The value to which [dB] is attached indicates a gain value. If this value is too
large, the quality of the image deteriorates.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO]. Or, Hold down the [PUSH] Dial.
≥For other notes, see page 47.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Recording with a Fixed Brightness
(AE Lock Function)
This is a function for setting a fixed brightness. When recording in light with
an extreme difference in the brightness of the background and the subject,
such as a person standing in front of a dark background, the person can be
recorded brightly if the brightness is adjusted to the person.
1 After setting to Camera Mode, press the [W/T] zoom Lever
toward [T] and zoom in to the part you want to record.
2 Set the Mode Selector Switch to [AE LOCK].
≥The [ ] Indication 1 flashes to indicate that the brightness is
fixed. Afterwards, it lights up white.
To fix your desired brightness
Set the Mode Selector Switch to [MANUAL] first and adjust the Shutter
Speed and Iris to the desired color in step 2, and then set the Mode Selector
Switch to [AE LOCK].
To cancel AE Lock Function
Set the Mode Selector Switch to [AUTO] or [MANUAL].
≥Set the AE Lock again when [TAPE/CARD] Selector is switched after the
AE Lock has been set. (The brightness setting may be changed.)
AE LOCK
MNL
1/60
F2.4
0dB
2, 3
1 AUTO
MANUAL
AE LOCK
VOL/JOG
PUSH
1