Panasonic AG-EZ50UP - Manual (Page 22)

22
25tW T
D.ZOOM
2
1
W T
MENU
VOL/JOG
PUSH
, 2
, !,1 ,3
FADE
1
MENU
VOL/JOG
PUSH
EIS
1
Digital Zoom Function
This function is useful when you want to record close-up shots of subjects
located beyond a normal zoom range of 1
t to 10t magnification. With the
digital zoom function, you can select a magnification of 25 t or 100t.
1 Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [25
t t t t ] or [100 t t t t ].
≥25k: Digital zooming to 25t
≥100k: Digital zooming to 100t
2 To zoom in or out, press the [W/T] zoom lever towards [W] or
towards [T].
≥As the magnification of digital zooming increases, the quality of image may
deteriorate.
Canceling the Digital Zoom Function
Set [D.ZOOM] on the [CAMERA SETUP] Sub-menu to [OFF].
≥For other notes, see page 46.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Optical Image Stabilizer Function
If you are recording in unstable situations and the Camera/Recorder is shaky,
you can use this function to correct the distortion in these images.
≥If the Camera/Recorder shakes too much, this Function may not be able to
stabilize images.
1 Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [EIS] >>
[ON].
≥The [EIS] Indication 1 appears.
Canceling Optical Image Stabilizer
Set [EIS] on the [CAMERA SETUP] Sub-Menu to [OFF].
≥For other notes, see page 46.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fade In/Out Functions
Fade In 1
Fade In brings out images and sounds gradually from a black screen at the
beginning of a scene.
1 Hold down the [FADE] Button while the Camera/Recorder is
set to the Recording Pause Mode.
≥The image fades out gradually.
2 When the image is completely gone, press the Recording
Start/Stop Button to start recording.
3 Release the [FADE] Button about 3 seconds after starting
recording.
≥The image reappears gradually.
Fade Out 2
Fade Out causes images and sounds to disappear gradually, leaving a black
screen at the end of a scene.
1 Hold down the [FADE] Button while recording.
≥The image fades out gradually.
2 About 3 seconds after the image is completely gone, press
the Recording Start/Stop Button to stop recording.
3 Release the [FADE] Button.
≥For other notes, see page 46.