Setting date and time, Internal lithium battery recharge, Lp mode – Panasonic AG-EZ50UP User Manual

Page 19: Audio recording mode

Advertising
background image

19

1, 3
1, 2

VOL/JOG

PUSH

MENU

CLOCK-SET

PUSH MENU TO RETURN

YEAR

:2001

MONTH :OCT
DAY :10
HOUR : 2PM
MINUTE:30

AUDIO-REC

12bit

RETURN

----

SP

LP

INDEX

2HOUR

WIND-CUT

OFF

RECORDING SETUP

PUSH

MENU TO EXIT

REC-SPEED

CAMERA FUNCTIONS

PUSH MENU TO EXIT

1.CAMERA SETUP

2.DIGITAL EFFECT

3.CARD SETUP

4.MULTI-PICTURES

5.RECORDING SETUP

6.DISPLAY SETUP

7.OTHER FUNCTIONS



REC-SPEED

AUDIO-REC

12bit

16bit

RETURN

----

SP

INDEX

2HOUR

WIND-CUT

OFF

RECORDING SETUP

PUSH

MENU TO EXIT

Setting Date and Time

1

Press the [MENU] Button and rotate the [PUSH] Dial to select
[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].

2

Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/
[DAY]/[HOUR]/[MINUTE] and set it to a desired value.

≥Year will cycle in the order shown below.

2000

) 2001 ) ... ) 2089 ) 2000 ) ...

3

Press the [MENU] Button to finish setting the date and time.

≥The clock operation starts from [00] seconds.
≥The menu will disappear when the button is pressed again.

≥It is possible that the built-in clock in the Camera/Recorder may become

inaccurate. Please check the time before recording. If the [

0] Indication is

flashing, charge the internal lithium battery and reset the date and time.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Internal Lithium Battery Recharge

The internal lithium battery sustains the operation of the clock. When the
[

0] Indication is lit, the internal lithium battery is near exhaustion.

1

Connect the AC Adaptor to the Camera/Recorder with the
power turned off and then connect to the AC Jack.

≥After charging for 4 hours, the built-in lithium battery can power the

clock for approximately 3 months.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

LP Mode

A desired recording speed can be selected with [REC-SPEED] on the

[RECORDING SETUP] Sub-Menu.

1

If LP Mode is selected, the recording time becomes 1.5 times longer
than that of SP Mode.
Although the image quality does not decrease with the LP Mode recording,
mosaic-like noise patterns may appear on a playback image, or some
functions may be restricted.
≥The contents that are recorded in LP Mode are not completely compatible

with other equipment.

≥Audio Dubbing is not possible with LP Mode. (

l 33)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Audio Recording Mode

The sound quality of the recorded sound can be selected with [AUDIO-REC]
on the [RECORDING SETUP] Sub-Menu.

2

High quality sound recording is possible with “16bit 48kHz 2 track” Mode.
With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on
2 tracks in stereo, while the other 2 tracks can be used for re-recording.

Advertising