Panasonic AG-EZ50UP - Manual (Page 48)

48
ª Multi-Picture Mode (VCR Mode)
( l 32)
≥The quality of Multi images deteriorates slightly.
≥Playback multi-mode screens cannot be output through DV
Terminal.
≥If there is input from DV Terminal, a multi screen cannot be
created.
≥When signals are input from Video Input/Output Jack or
Audio-Video Input/Output Jack, a multi screen cannot be
re-displayed.
≥Signals input from Video Input/Output Jack or Audio-Video
Input/Output Jack cannot be displayed on a multi screen.
ª Listening to Playback Sound Through
Headphones ( l 28)
If you want to listen to the playback sound of a tape through
headphones, set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [OUT/PHONES] and connect the headphones
to the [PHONES] Jack on this Camera/Recorder. In this
case, no sound (including a warning sound and shutter
sound) will be reproduced through the built-in speaker of the
Camera/Recorder. When the A/V Cable is inserted into the
AV Jack, the internal speaker works.
ª Selecting the Sound during Playback
( l 28, 33)
You can select the sound by using the [AUDIO OUT] on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and sub sound)
L:
Left channel sound (main sound)
R: Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the
[AUDIO-REC] setting, playback sound becomes stereo
sound regardless of whether [AUDIO] is set to [MIX] or to
[AUDIO OUT].
ª Audio Dubbing
( l 33)
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot be dubbed.
≥If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
≥If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible
to use the Memory Stop function
( l 52), Audio Dubbing is
terminated automatically when the tape reaches this
position.
≥In the case of importing data recorded with Audio Dubbing
to a Computer using the Computer’s software program,
only the original sound (ST1) may be imported, depending
on the software program.
Microphone Jack
When audio dubbing is carried out through an external
microphone or audio equipment, connect it to the [MIC] Jack.
In this case, the built-in microphone of the Camera/Recorder
will be turned off.
ª Card Functions
( l 34 - 39)
≥Do not touch the connector terminal located on the back of
the card.
≥If the Card Slot Cover is open, the card cannot be accessed.
≥Wide images cannot be recorded on the Memory Card.
≥A card that was formatted with this Camera/Recorder may
not be usable in other equipment. If this happens, please
format the card with the equipment with which the card is to
be used. Before proceeding with this operation, we suggest
that you take the precautionary measure of storing
important images in your personal computer.
≥In the Card Photoshot mode, the Camera/Recorder
automatically saves the file names (Imga0001.jpg, etc.)
along with the pictures. A file name is recorded with each
picture as a running number.
ª Recording to a Card from other equipment
( l 34, 41)
If you set the [TAPE/CARD] Selector to [CARD], you can use
the Card Photoshot Function for externally input signals.
(Not during recording.)
≥Black streaks may appear at the four edges of the image.
≥When the [PHOTO SHOT] Button is pressed, the image
may seem to move backward momentarily, but this does
not affect the recording.
ª Card Photshot Recording
( l 34)
≥The Progressive Function is set to [ON].
≥The shutter speed becomes 1/60-1/500.
≥When viewed on a TV or liquid crystal monitor, image
quality deteriorates slightly.
≥The screen becomes slightly wider.
≥Mega-pixel images cannot be recorded on a cassette as a
Mega-pixel picture.
ª Low Light Shot
( l 34)
≥When recording in low-light conditions, set [LOW LIGHT
SHOT] to [AUTO]. When the Shutter Speed is 1/30, Low
Light Shot operates and the [
4 4 4 4
CARD
] Indication is displayed.
≥The brightness of the picture may change with Low Light
Shot.
≥When Shutter Speed ( l 24) is set and Program AE (l 23)
is set, [LOW LIGHT SHOT] will not operate even if set to
[AUTO].
ª Card Playback
( l 35)
≥In the case of displaying memory images on a Multi screen,
if there are 7 or more images, they cannot be displayed all
at once. Rotate the [PUSH] Dial or use the [
sSEARCH]
Button or [ rSEARCH] Button to display the next 6 still
pictures.
≥When pictures recorded by another Camera/Recorder are
played back with this Camera/Recorder, the size of the
pictures may be different from the recorded size.
ª Title Functions
( l 37)
≥Regardless of the [PICTURE SIZE] setting, the size of
created title picture is [640 t480].
≥If you create an original title, the number of pictures that
can be recorded on the Memory Card decreases.
≥If the number of pictures that can be recorded on the
Memory Card is small, you may not be able to create an
original title in some cases.
≥When a title is displayed in VCR Mode, the title is not
output from the DV Terminal.
≥When the [TAPE/CARD] Selector is set to [CARD] and
[1488 t1128] is selected for [PICTURE SIZE], titles are not
displayed.
ª DPOF setting
( l 39)
≥The number of prints can be set from 0 to 99.
≥Perform DPOF setting on the Camera/Recorder you are
using.
≥It may take some time to verify the DPOF setting. Please
wait until the [ACCESS] Lamp goes off.
ª Using your Camera/Recorder with Digital
Video Equipment (Dubbing) ( l 42)
≥Regardless of the setting, dubbing is carried out
automatically in the same audio recording Mode as that of
the Cassette in the playback-side equipment.
≥The images on the monitor of the recording side may be
disturbed, but it does not affect the recorded images.
≥Even if Playback Digital Effects, Playback Zoom or
Playback Title In have been used, these effects are not
output from the DV Terminal.
≥Even if you use a device with DV Terminals (such as
i.LINK), you may not be able to perform digital dubbing in
some cases.