Panasonic DIGA DMR-EH65 - Manual (Page 14)

14
RQT8380
STEP
1
Connection
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Select the connection pattern that matches your environment from pattern A–B. Confirm connections not listed below with your dealer.
Make sure to use the pair of supplied RF coaxial cables
Use the pair of supplied RF coaxial cables only when you make connections to the unit through its RF IN and RF OUT terminals. Striping may
appear and disrupt images on the TV if you use different cables for connection.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off
[approx. 2 W (Power Save mode)]
When “Power Save” is set to “On”, the “Quick Start” function does not work.
A Connecting a television
B Connecting a television and VCR
AC IN OPTICAL OPTICAL
DIGITAL AUDIO OUT DIGITAL AUDIO OUT (PCM/BITSTREAM) (PCM/BITSTREAM) S VIDEO S VIDEO VIDEO VIDEO R-AUDIO-L R-AUDIO-L
AV4 INA V 4 I N
OUTO U T
AV2 (DECODER/EXT)
AV1 (TV)
P R P B Y
COMPONENT VIDEO OUT COMPONENT VIDEO OUT
RF RF
IN IN
RF RF
OUT
OUT
4 3
2 1
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO IN
AV OUT
To the aerial
Television’s rear panel Aerial
cable
RF coaxial cable
(included)
This unit’s rear panel
To household mains socket
[For]Australia]and]N.Z.]
(AC 220 to 240 V, 50 Hz)
[For]Asia]and]Middle]East]
(AC 220 to 240 V, 50/60 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
Cooling fan
RF coaxial
cable
(included)
Red White Yellow
Red White Yellow
[For\Saudi\Arabia[ BE SURE TO
READ THE
CAUTION FOR
THE AC MAINS
LEAD ON PAGE
2 BEFORE
CONNECTION.
Audio/Video cable
(included)
[For]Middle]East]
≥Use the AC mains lead that
matches the socket for the area
you live in.
Other connections
(
➡ 15, 16)
AC IN OPTICAL OPTICAL
DIGITAL AUDIO OUT DIGITAL AUDIO OUT (PCM/BITSTREAM) (PCM/BITSTREAM) S VIDEO S VIDEO VIDEO VIDEO R-AUDIO-L R-AUDIO-L
AV4 INA V 4 I N
OUTO U T
AV2 (DECODER/EXT)
AV1 (TV)
P R P B Y
COMPONENT VIDEO OUT COMPONENT VIDEO OUT
RF RF
IN IN
RF RF
OUT
OUT
4
3
2
1
VHF/UHF
RF IN
VHF/UHF
RF IN
5
RF OUT
6
AUDIO IN
R L
VIDEO IN
VIDEO OUT
R L
AUDIO OUT
AV OUT
To the aerial
Aerial
cable
Cooling fan
RF coaxial cable
(included)
This unit’s rear panel
Television’s rear panel
VCR’s rear
panel
AC mains lead
(included)
Connect only after all other
connections are complete.
RF coaxial cable
(included)
Connect the unit directly to the television
If you connect the unit through an AV
selector or video cassette recorder to the
television, video signal will be affected by
copyright protection systems and the picture
may not be shown correctly.
Television
VCR
This unit
≥When connecting to a television with a built-in VCR
Connect to the input terminals on the television side if there
are both television and VCR input terminals.
[For\Saudi\Arabia[ BE SURE TO
READ THE
CAUTION FOR
THE AC MAINS
LEAD ON PAGE
2 BEFORE
CONNECTION.
To household mains socket
[For]Australia]and]N.Z.]
(AC 220 to 240 V, 50 Hz)
[For]Asia]and]Middle]East]
(AC 220 to 240 V, 50/60 Hz)
Audio/Video cable
(included)
Audio/Video cable
Red White Yellow
Red White Yellow
Red White Yellow
Red White Yellow
[For]Middle]East]
≥Use the AC mains lead that
matches the socket for the area
you live in.
Other connections ( ➡ 15, 16)
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB
output on this unit.
[Required]setting]
“AV1 Output” in the Setup menu (
➡ 61)
Connecting to a VCR with 21-pin Scart terminal
You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.
[Required]setting]
“AV2 Input” in the Setup menu (
➡ 61)
EH65.book Page 14 Monday, April 3, 2006 5:10 PM