Panasonic DIGA DMR-EH65 - Manual (Page 24)

24
RQT8380
Timer recording
See also “Important notes for recording” ( ➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
( ➡ 20).
≥Make sure that the clock settings are correct ( ➡ 64).
[For]Australia]and]N.Z.]
[For]Australia]and]N.Z.]
Entering G- CODE numbers is an easy way of timer recording. You can
find these numbers in TV listings in newspapers and magazines.
1
Press [G-Code].
2
Press the numbered buttons to enter
the G-
CODE number.
Press [ 2] to move back to correct a digit.
3
Press [ENTER].
≥Confirm the programme and make corrections if necessary
using [ 3, 4, 2, 1] ( ➡ 25, step 3).
≥When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [ 3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
4
Press [ENTER].
The settings are stored and the timer programme is on.
Timer icon is displayed in left column.
“ F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
∫ To cancel recording when recording has already
begun ( ➡ 26)
∫ To release the unit from recording standby
( ➡ 26)
∫ Notes on timer recording ( ➡ 26)
G- CODE is a registered trademark of
Gemstar Development Corporation. The
G-
CODE system is manufactured under
license from Gemstar Development
Corporation.
PROG/CHECK
DISPLAY DISPLAY STATUS STATUS AUDIO AUDIO
DELETE DELETE F Rec F Rec REC MODE REC MODE REC REC
CREATE CREATE
CHAPTER CHAPTER
ENTER ENTER
FU
NC
TIO
NS
DI RE
CT
NA
VIG
AT OR
PROG/CHECK
RETURN RETURN SUB MENU SUB MENU
S
MANUAL SKIP MANUAL SKIP
PLAY/x1.3 PAUSE PAUSE STOP STOP
SLOW/SEARCH SLOW/SEARCH SKIP SKIP
G-Code G-Code
INPUT SELECT INPUT SELECT
CH CH
0
9 8 7
6 5 4
3 2 1
VOLUME VOLUME CH CH
AV AV
Í
TV TV
DRIVE DRIVE
SELECT
SELECT
Í
DVD
-/-- -/--
TIME SLIP TIME SLIP
A B C
G-Code
3,4,2,1
ENTER
DRIVE
SELECT
REC MODE
Numbered
buttons
e.g., [Australia]and]N.Z.]
Using G- CODE system to make timer
recordings
G-Code
Record 1:58 SP DVD 30:24 SP HDD Remain
12:53:00 15. 7. TUE
Input G-Code Number 0-9, and press ENTER.
G-Code
Record 1:58 SP DVD 30:24 SP HDD Remain
12:53:00 15. 7. TUE
Input G-Code Number 0-9, and press ENTER.
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
12:54:00 15. 7. TUE
Mode Stop Start Name Date
HDD
DVD
20:00 19:00 15. 7. TUE SP HDD 1 ARD
Programme Name
Timer
Recording
Remain
No. Date Name
ARD 15. 7. TUE 01
New T
F Timer icon
Timer
Recording
1:58 SP DVD 30:24 SP HDD Remain
12:56:00 15. 7. TUE
Mode Stop Start No. Date
HDD
DVD
HDD
Name
Drive
space
SP OK 20:00 19:00 ARD 15. 7. TUE 01
New Timer Programme
F
Check to make sure “OK”
is displayed (
➡ 27).
EH65.book Page 24 Monday, April 3, 2006 5:10 PM