Panasonic DIGA DMR-EH65 - Manual (Page 62)

62
RQT8380
Changing the unit’s settings
Refer to the control reference on page 58 .
1
While stopped
Press [FUNCTIONS].
2
Press [ 3, 4] to select “To Others”
and press [ENTER].
3
Press [ 3, 4] to select “Setup” and
press [ENTER].
4
Press [ 3, 4] to select “Tuning” and
press [ 1].
You can add or delete channels, or change programme positions.
5
Press [ 3, 4] to select “Manual” and
press [ENTER].
To delete a programme position
Press [
3, 4, 2, 1] to select a programme position and press [A].
To add a blank programme position
Press [
3, 4, 2, 1] to select a programme position and press [B].
To move a TV station to another programme position
1 Press [
3, 4, 2, 1] to select a programme position and press
[C].
2 Press [ 3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [ENTER].
∫ To change the tuning settings for individual
programme position
6
Press [ 3, 4, 2, 1]
to select a
programme position
and press [ENTER].
Press [ 3, 4] to select an item and press [1].
§ Only for Asia and Middle East
Tuning
Manual
Setup
Disc
Picture
Sound
Display
Connection
Tuning
Manual
Auto-Setup Restart
Others ENTER RETURN
TAB SELECT
Manual Tuning
Pos Name Ch Pos Name Ch
Delete
Add
Move
1 ARD 4
2 ZDF 2
3 N3 5
4 HR3 8
5 BR3 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
ENTER RETURN
SELECT
A B C
Pos To change the programme position in which
the TV stations are assigned
Press [
3, 4] or numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name To enter or change the name of a TV station
Press [
3, 4, 2, 1] to enter station name and
press [ENTER].
If the station name needs a blank space, select
the blank between “Z” and “
¢”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [
3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[ENTER].
Fine Tuning To obtain the best tuning condition
Press [
3, 4] to adjust the best tuning condition
and press [ENTER].
≥Press [1] to return to “Auto”.
Video
System
§
To select the video system type
Press [
3, 4] to select “PAL” or “SECAM” if the
picture lacks colour, and press [ENTER].
Auto:
This unit automatically distinguishes
PAL and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
This setting is also available when you select the
external input channel (AV1, AV2, AV3, AV4) in
step 5.
In order to record properly, make the appropriate
settings to match the connected equipment.
Audio
Mode
§
To select the audio reception type
If sound quality is poor, press [
3, 4] to select
“BG”, “I” or “DK” and press [ENTER].
BG: PAL B.G.
I:
PAL I
DK: PAL D.K.K1
Mono To select the type of sound to be recorded
Press [
3, 4] to select “On” if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound
during a stereo, bilingual or NICAM broadcast,
and press [ENTER].
Pos
Name
Channel
Fine Tuning
Mono
1
4
Auto
RETURN : leave
Manual
Tuning
ARD
Off
RETURN
SELECT
e.g., [Australia]and]N.Z.]
EH65.book Page 62 Monday, April 3, 2006 5:10 PM