Other connections, Connecting a stereo amplifier, Ste p 1 c onne c tion – Panasonic DIGA DMR-EH65 User Manual
Page 15: Connecting a television with s video terminals, Connecting an amplifier or system component
15
RQT8380
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (
➡ 73) and provide a purer picture than the
S VIDEO OUT terminal.
≥Connect to terminals of the same colour.
If you have a regular television (CRT: cathode ray tube)
Use component output with progressive “Off” (Factory setting
➡ 61),
even if it is progressive compatible, because progressive output can
cause some flickering. This is the same for multi system televisions
using PAL mode.
For progressive output (
➡ 18)
∫ Connecting an amplifier with a digital input
terminal
≥To enjoy multi-channel surround sound DVD-Video, connect an
amplifier with Dolby Digital, DTS and MPEG decoders.
[Required]setting]
“Digital Audio Output” in the Setup menu (
➡ 60)
≥When this unit is connected to an amplifier with an Optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
“Digital Audio Output” to “Optical Only” in the Setup menu (
➡ 61).
In this case audio is only output from the amplifier not the
television.
≥Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
≥You cannot use DTS Digital Surround decoders not suited to DVD.
≥Even if using this connection, output will be only 2 channels when
playing DVD-Audio.
∫ Connecting a stereo amplifier
Other connections
Connecting a television with S VIDEO terminals
OPTICAL
OPTICAL
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(PCM/BITSTREAM)
S VIDEO
S VIDEO
VIDEO
VIDEO
R-AUDIO-L
R-AUDIO-L
AV4 INA
V
4
I
N
OUTO
U
T
S VIDEO
IN
AUDIO IN
R L
VIDEO
IN
AV OUT
Television’s rear panel
S Video
cable
Red White
Red White
Audio/Video cable
(included)
This unit’s rear panel
Connecting a television with COMPONENT VIDEO
terminals
OPTICAL
OPTICAL
DIGITAL A
DIGITAL AUDIO
(PCM/BIT
(PCM/BITSTRE
S VIDEO
S VIDEO
VIDEO
VIDEO
R-AUDIO-L
R-AUDIO-L
AV4 INA
V
4
I
N
OUTO
U
T
AV2 (DECODER/EXT)
AV1 (TV)
P
R
P
B
Y
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
RF
RF
IN
IN
RF
RF
OUT
OUT
AV OUT
AUDIO IN
R L
P
R
P
B
Y
COMPONENT
VIDEO IN
Red White
Red White
Video cable
Audio/Video
cable
(included)
Television’s rear panel
This unit’s rear panel
COMPONENT VIDEO OUT
COMPONENT
VIDEO IN
CRT
This unit
Progressive output
Connecting an amplifier or system component
OPTICAL
OPTICAL
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(PCM/BITSTREAM)
IDEO
S VIDEO
OPTICAL IN
AV OUT
Optical digital
audio cable
Do not bend
sharply when
connecting.
This unit’s rear panel
Insert fully, with this
side facing up.
Amplifier’s
rear panel
OPTICAL
OPTICAL
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(PCM/BITSTREAM)
S VIDEO
S VIDEO
VIDEO
VIDEO
R-AUDIO-L
R-AUDIO-L
AV4 INA
V
4
IN
OUTO
U
T
/EXT)
AUDIO IN
R L
AV OUT
Red White
Red White
Audio cable
This unit’s rear panel
Amplifier’s rear panel
STE
P
1
C
onne
c
tion
EH65.book Page 15 Monday, April 3, 2006 5:10 PM