Panasonic DIGA DMR-EH65 - Manual (Page 22)

22
RQT8380
Recording television programmes
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
During recording
Press [ ¥ REC] on the main unit to select the recording
time.
≥You can specify up to 4 hours later.
≥The unit display changes as shown below.
≥This does not work during timer recordings ( ➡ 24) or while using
Flexible Recording ( ➡ 23).
≥If you change the channel or recording mode while recording is
paused, the time specified to stop recording is cancelled.
≥The unit turns off automatically after the time to stop recording is
reached.
To cancel
Press [
¥ REC] on the main unit several times until the counter
appears.
≥The time to stop recording is cancelled; however, recording
continues.
To stop recording
Press [
∫].
1
While stopped
Press [FUNCTIONS].
2
Press [ 3, 4] to select “To Others”
and press [ENTER].
3
Press [ 3, 4] to select “Setup” and
press [ENTER].
4
Press [ 3, 4] to select “Disc” and
press [ 1].
5
Press [ 3, 4] to select “Settings for
Recording” and press [ENTER].
6
Press [ 3, 4] to select “Rec for High
Speed Copy” and press [ENTER].
7
Press [ 3, 4] to select “On” and press
[ENTER].
8
Press [ 2, 1] to select “Yes” and
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
[Note]
If you do not intend to copy titles in high speed mode to DVD-R,
DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW, set
“Rec for High Speed Copy” to “Off”.
To specify a time to stop recording—
One Touch Recording
OFF 0:30 ""# OFF 1:00 ""# OFF 1:30 ""# OFF 2:00
^" Counter (cancel) ,"" OFF 4:00 ,"" OFF 3:00 ,}
OPEN/CLOSE DRIVE SELECT
k1.3 1 . 3
REC
∫
1 DRIVE
SELECT
¥ REC
F Rec
STATUS
DISPLAY DISPLAY STATUS STATUS AUDIO AUDIO
DELETE DELETE F Rec F Rec REC MODE REC MODE REC REC
CREATE CREATE
CHAPTER CHAPTER
ENTER ENTER
FU
NC
TIO
NS
DI RE
CT
NA
VIG
AT OR
PROG/CHECK
RETURN RETURN SUB MENU SUB MENU
S
MANUAL SKIP MANUAL SKIP
PLAY/x1.3 PAUSE PAUSE STOP STOP
SLOW/SEARCH SLOW/SEARCH SKIP SKIP
G-Code G-Code
INPUT SELECT INPUT SELECT
CH CH
0
9 8 7
6 5 4
3 2 1
VOLUME VOLUME CH CH
AV AV
Í
TV TV
DRIVE DRIVE
SELECT
SELECT
Í
DVD
-/-- -/--
TIME SLIP TIME SLIP
A B C
RETURN
FUNCTIONS
1
DRIVE
SELECT
∫
3,4,2,1
ENTER
DIRECT
NAVIGATOR
Numbered
buttons
e.g., [Australia]and]N.Z.]
Recording settings for High Speed
Copy
When copying in high speed mode to DVD-R, DVD-R DL,
DVD-RW (DVD-Video format), +R, +R DL and +RW after you
have recorded to the HDD
If copying a title using the high speed mode to a DVD-R, etc., set
“Rec for High Speed Copy” to “On” before recording to the HDD.
However, the following restrictions apply:
≥When recording bilingual broadcasts, either the main or
secondary audio can be recorded.
–If you do not connect external equipment
Select “M 1” or “M 2” in “Bilingual Audio Selection” in the
Setup menu (
➡ 60).
–If you connect external equipment
Select “M 1” or “M 2” on the external equipment.
≥Even 16:9 aspect (Widescreen) programmes are recorded in
4:3 aspect.
Refer to the “Important notes for recording” for more information
(
➡ 8).
To start recording
≥Recording television programmes (
➡ 20)
≥Timer recording ( ➡ 24)
≥Copying from a video cassette recorder ( ➡ 52)
EH65.book Page 22 Monday, April 3, 2006 5:10 PM