PictureTel 4500 - Manual (Page 56)

50
To set a camera preset with the QuickPad:
1. Press NEAR END in the VIEW section of the QuickPad.
The image you are sending appears in the main window of the monitor.
With the QuickPad, you can set presets for your site only.
2. Adjust the camera by pressing POINT and ZOOM (or by using the camera’s
manual controls, if it has them).
Keep doing this until the image appears exactly the way you want it.
3. Press SET .
4. Press a preset number button or SHOW ROOM to store that camera position.
You can also press the blue button or SHOW ROOM on the LAMB to store a
preset position for that button.
5. Press FAR END in the VIEW section of the QuickPad to return to normal viewing.
Using Camera Presets
Once youÕve set your camera presets, you can simply press the appropriate
button and the camera moves to the preset position.
If you have a LAMB, you can move the camera to a preset position by pressing the
blue button or
SHOW ROOM on the LAMB.
To move a camera to a preset position:
Press a preset number button or SHOW ROOM .
The camera moves to the preset view.